As soon as the injection system falls into breakdown it's really unpleasant. Generally, this is noticed by fuel fumes or a loss of power. The problem comes from the injectors? from the injection pump? We will answer these questions in order to properly determine this problem. But first, it is essential to understand the principle of an injection system .
Injection system on a Toyota Endo: how it works
In order to function properly, the engine of the Toyota Endo requires a mixture of air and fuel. It is injector which allows this mixture to be sent inside the engine. It is for this reason that if the injector presents a problem, the Toyota Endo could hardly start. An injection system is composed of pumps and injectors , sometimes joined via a common rail . The very first injection engine was invented in 1893 by Rodolphe Diesel himself.
Injector problem on a Toyota Endo: causes and consequences
Lack of power or acceleration
When the Toyota Endo loses power, or even has power holes, it is probably due to the injector. It remains likely that it is dirty due to waste. This is why it is essential to use a qualitative fuel. Make a descaling is going to be less expensive than having the device changed.
Fuel smell
If fuel fumes are felt, it is likely to be from a fuite . When that's right, it's best to avoid driving with the Toyota Endo. Fuel leaks are infrequent but rather dangerous. So call the mechanic, he will know what to do. When it's a joint problem, you can afford a repair. Better that the injector is not irretrievably out of service.
Engine runs but does not start
The problem does not necessarily come from the injector. The causes can be many. If on the other hand you are convinced that the injector is the source, it is probably because of the injection pump . It happens that the latter is seized or contains a leak. Remember that changing the injection pump of the Toyota Endo is rather expensive, so it is essential to properly identify the problem.
Maintaining the injection of your Toyota Endo
These are now valuable solutions to deal with injection problems.
- Buy one fuel of good quality.
- Take a ride for about 15 minutes at 3000 rpm Once every two months. The heat generated by the engine should dust the components, and the injection in passing.
- Drain rather regularly.
Now you know what the problems with the injection of the Toyota Endo will be and some valuable techniques so that you can avoid them. If your problem continues, do not hesitate to go to a mechanic, because it is a very important part of the engine. Leave us a comment if this post on the injection was useful. Enjoy the road!