As soon as your injection system goes down breakdown it's really annoying. Usually, it is distinguished by fuel fumes or power losses. The malfunction comes from the injectors? from the injection pump? We will answer these questions in order to best identify the dysfunction. But first, it is essential to grasp the injection system operation .injector-fault-Toyota-Ft-86- (2)

Injection system on a Toyota Ft-86 (2): how it works

To function properly, the engine of this Toyota Ft-86 (2) requires a mixture of air and fuel. It is injector which will propel this mixture inside the engine. It is for this reason that if the injector malfunctions, the Toyota Ft-86 (2) may not start. The injection system is made of pumps and injectors , sometimes joined by a common rail . The first injection engine was developed in 1893 by Rodolphe Diesel personally.

Injector problem on a Toyota Ft-86 (2): origins and consequences

Lack of power or acceleration

When the Toyota Ft-86 (2) lacks power, or has acceleration holes, it is probably due to the injector. It is possible that it will be obstructed due to deposits. This is why it is useful to use a qualitative fuel. Perform a descaling you will be much cheaper than having the device replaced.

Fuel smell

In the event that fuel fumes arrive, this must certainly come from a fuite . If this is what is happening, avoid driving with this Toyota Ft-86 (2). Leaks turn out to be rare but relatively dangerous. So go to your garage, he will tell you what to do. If it is a joint, you can try the repair. Hoping that the injector is not clearly HS.

Engine runs but does not start

The malfunction does not always come from the injector. The origins will be diverse. If on the other hand you are convinced that the injector is the source, it is probably because of the injection pump . It may be seized or else have a leak. Remember that replacing the injection pump of the Toyota Ft-86 (2) is relatively expensive, it is therefore essential to properly discern the malfunction.

Maintain the injection of your Toyota Ft-86 (2)

Here are now various solutions to anticipate injection malfunctions.

  • Choose one fuel of a very high quality.
  • Roll about fifteen minutes at 3000 rpm Once every two or three months. The temperature emitted by the engine will then unclog the components, as well as the injection in passing.
  • Drain relatively regularly.

Now you know what will be the malfunctions related to the injection of the Toyota Ft-86 (2) and various methods so as to work around them. In the event that your problem persists, you can go to a mechanic, since it is an extremely essential element of the engine. Leave a comment if this article on injection helped you. Good walk!