As soon as this injection system falls into breakdown it can be very unpleasant. Usually, it is noticed by fuel fumes or a loss of power. The problem comes from the injectors? of the injection pump? We will answer these questions in order to correctly determine this concern. But above all, it may be wiser to seize the injection system operation .
Injection system on a Toyota Prius 4: how it works
In order to function properly, the engine of the Toyota Prius 4 requires a mixture of air and fuel. This is injector which allows this mixture to be sent inside the engine. If there is a problem with the injector, the Toyota Prius 4 may not start. An injection system is made of a pumps and injectors , sometimes joined by a common rail . The first model of injection engine was invented in 1893 by Rodolphe Diesel himself.
Injector problem on a Toyota Prius 4: reasons and consequences
Lack of power or acceleration
If ever this Toyota Prius 4 lacks power, or has throttle holes, it's probably related to the injector. It remains possible that the latter remains clogged because of deposits. This is why it is essential to use quality fuel. Make a descaling will be much cheaper than having the device replaced.
Fuel smell
If fuel fumes are felt, it is probably from a fuite . If this is the case, it is better to avoid driving the Toyota Prius 4. Leaks are infrequent, but relatively serious. So call your mechanic, he will explain what to do. If it is ever a problem with the seal, you can do a repair. Better that the injector is not completely out of service.
Engine runs but does not start
The problem does not automatically come from the injector. The reasons will be many. If, however, you are sure that the injector is the cause, it is probably due to the injection pump . This may be seized or contains a leak. Note that replacing the injection pump in this Toyota Prius 4 is relatively expensive, so it is wiser to correctly spot the problem.
Maintaining the injection of your Toyota Prius 4
Now here are several solutions to deal with injection malfunctions.
- Buy one fuel of good quality.
- Drive about 15 minutes to 3000 revolutions per minute Once every two or three months. The heat generated by the engine will then unclog the components, and the injection obviously.
- Drain relatively often.
Now you know what are the malfunctions related to the injection of this Toyota Prius 4 and several methods if you want to get around them. If your problem persists, do not hesitate to go to a mechanic, quite simply because it is a very essential part of the engine. Leave us a comment if this article on injection was helpful to you. Good road!