When your injection system goes down breakdown it remains very unpleasant. Usually, this is noticed by fuel fumes or loss of acceleration. The concern comes from the injectors? from the injection pump? We will answer these questions to correctly identify your concern. But first, it is wiser to grasp the principle of the injection system .
Injection system on a Toyota Rav 4 (2th Generation): how it works
To function properly, the engine block of your Toyota Rav 4 (2nd Generation) needs a mixture of air and fuel. It is injector which allows this mixture to be sent within the engine block. If the injector has a problem, your Toyota Rav 4 (2nd Generation) may not start. The injection system consists of a pumps and injectors , gathered regularly through a common rail . The first injection engine block was developed in 1893 by Rodolphe Diesel himself.
Injector problem on a Toyota Rav 4 (2th Generation): origins and consequences
Lack of power or acceleration
If this Toyota Rav 4 (2nd Generation) loses power, or even has power holes, it is probably due to the injector. It remains possible that the latter is obstructed because of deposits. It is for this reason that it is wiser to use a quality fuel. Perform a descaling you will be much cheaper than having this device replaced.
Fuel smell
When fuel fumes are felt, it probably comes from a fuite . If that's the case, avoid driving with your Toyota Rav 4 (2nd Generation). Leaks turn out to be rare, however, rather dangerous. So go to your garage, the latter will know what to do. If it is ever a joint problem, you can try the repair. Better that the injector is not clearly HS.
Engine runs but does not start
The problem does not necessarily come from the injector. The origins can be diverse. If however you still feel certain that the injector is the source, it is probably due to the injection pump . It is possible that this is seized or else have a leak. You should know that replacing the injection pump of this Toyota Rav 4 (2nd Generation) is rather expensive, it is therefore wiser to properly identify the problem.
Maintain the injection of your Toyota Rav 4 (2th Generation)
Here are now several solutions to avoid injection malfunctions.
- Select a fuel of good quality.
- Drive about fifteen minutes to 3000 revolutions per minute 1 time every two or three months. The temperature generated by the engine block will then clean the components, as well as the injection on the way.
- Drain rather often.
Now you know what will be the malfunctions related to the injection of this Toyota Rav 4 (2nd Generation) and several methods to avoid them. If your problem persists, do not hesitate to go to a garage, because it is an extremely important element of the engine block. Leave a comment if this injection text served you well. Good walk!