When this injection system falls into breakdown it can be extremely unpleasant. Usually it is distinguished by the smell of fuel or a lack of power. The problem comes from the injectors? of the injection pump? We will answer these questions to correctly identify this concern. But first, it can be important to understand the operation of an injection system .Toyota-Rav-4-injector-tip

Injection system on a Toyota Rav 4: how it works

To be able to operate properly, the engine block of your Toyota Rav 4 uses a mixture of air and fuel. It is injector which will allow this mixture to be propelled inside the engine block. It is for this reason that if the injector has a problem, your Toyota Rav 4 could no longer start. The injection system is made of a pumps and injectors , sometimes joined by common rail . The very first injection engine block was invented in 1893 by Rodolphe Diesel himself.

Injector problem on a Toyota Rav 4: origins and consequences

Lack of power or acceleration

If ever this Toyota Rav 4 lacks power, or even has power holes, it is probably due to the injector. It remains possible that it remains dirty because of waste. It is for this reason that it is useful to use a quality fuel. Make a descaling is much cheaper than having this system replaced.

Fuel smell

When you smell fuel, it probably comes from a fuite . When this is correct, it is better to avoid taking your Toyota Rav 4 for a walk. Leaks turn out to be exceptional but quite serious. So go to the mechanic, he will know what to do. When it is a seal, you can attempt the repair. Hopefully the injector is not irreparably broken.

Engine runs but does not start

The problem does not always come from the injector. The origins can be various. If, on the other hand, you feel certain that the injector is the source, it is probably because of the injection pump . It is possible that it is seized or hold a leak. Remember that replacing the injection pump on this Toyota Rav 4 is quite expensive, so it is important to discern the problem.

Maintain the injection of your Toyota Rav 4

Here are some great ways to get ahead of injection problems.

  • Put one fuel of good quality.
  • Roll about fifteen minutes at 3000 revolutions per minute Once every two months. The temperature emitted by the engine block will then dust off the components, and the injection by the way.
  • Drain fairly frequently.

Now you know what the problems will be in connection with the injection of this Toyota Rav 4 and valuable tips if we want to avoid them. If your failure does not go away, you can go to a specialist, because it is a frankly capital element of the engine block. Leave a comment if this file on the injection has ever served you. Enjoy the road!