In the event that this injection system falls into breakdown it remains frankly unpleasant. Usually, it can be distinguished by fuel fumes or even a loss of power. The problem comes from the injectors? of the injection pump? We will answer these questions to identify the problem as well as possible. But above all, it remains important to understand the operation of your injection system .
Injection system on a Toyota Urban Cruiser: how it works
To be able to function well, the engine of the Toyota Urban Cruiser needs a mixture of air and fuel. This is injector which allows this mixture to be sent to the engine. It is for this reason that if there is a problem with the injector, your Toyota Urban Cruiser may have difficulty starting. An injection system is made of a pumps and injectors , sometimes brought together through a common rail . The first model of injection engine was invented in 1893 by Rodolphe Diesel himself.
Injector problem on a Toyota Urban Cruiser: reasons and consequences
Lack of power or acceleration
When the Toyota Urban Cruiser loses power, or has throttle holes, it's probably related to the injector. It is possible that it remains dirty because of waste. It is for this reason that it is wiser to use a qualitative fuel. Perform a descaling is less expensive than having the device changed.
Fuel smell
When fuel fumes are felt, it is likely to come from a fuite . When this is happening, avoid driving the Toyota Urban Cruiser. Fuel leaks will be rare however rather serious. So go to the mechanic, he will explain what to do. When it is a joint, you can attempt a repair. Better that the injector is not completely out of service.
Engine runs but does not start
The concern does not necessarily come from the injector. The reasons may be diverse. When, however, you are sure that the injector is the cause, it is probably because of the injection pump . The latter may be seized or contains a leak. Do not forget that changing the injection pump of the Toyota Urban Cruiser is rather expensive, it is in fact important to properly distinguish the problem.
Maintain the injection of your Toyota Urban Cruiser
We now offer several techniques to deal with injection problems.
- Choose one fuel of a very high quality.
- Drive about 15 minutes at 3000 rpm Once every quarter. The temperature emitted by the engine will clean the constituents, and the injection obviously.
- Drain rather frequently.
Now you know what the problems with the injection of the Toyota Urban Cruiser are going to be and several techniques to avoid them. If this problem continues, do not hesitate to go to a specialist, quite simply because it is a frankly essential part of the engine. Leave a comment if this injection guide has helped you. Good road!