In the event that your injection system breaks down breakdown it can be very annoying. Usually, this is distinguished by fuel effluxes or loss of acceleration. The concern comes from the injectors? from the injection pump? We will answer these questions to properly identify your concern. But above all, it may be essential to understand the principle of an injection system .injector-fault-Toyota-Yaris-2-Ts

Injection system on a Toyota Yaris 2 Ts: how it works

To be able to work well, the engine block of the Toyota Yaris 2 Ts needs a mix of air and fuel. It is injector which allows this mixture to be shipped within the engine block. It is for this reason that if the injector has a problem, the Toyota Yaris 2 Ts may not start. An injection system is made of pumps and injectors , sometimes brought together by a common rail . The first injection engine block was designed in 1893 by Rodolphe Diesel himself.

Injector problem on a Toyota Yaris 2 Ts: causes and consequences

Lack of power or acceleration

If ever the Toyota Yaris 2 Ts loses power, or has power holes, it is probably due to the injector. It is still possible that it remains dirty due to deposits. It is for this reason that it is essential to use a quality fuel. Make a descaling you will be much cheaper than having the device replaced.

Fuel smell

In the event that fuel effluxes arrive, this probably comes from a fuite . If that's right, avoid driving with the Toyota Yaris 2 Ts. Fuel leaks are exceptional but relatively dangerous. So go to your mechanic, who will explain what to do. If it's a joint problem, you're going to be able to do a repair. Hopefully the injector is not clearly HS.

Engine runs but does not start

The concern does not always come from the injector. The causes can be diverse. However, if you are certain that the injector is the source, it is probably due to the injection pump . It is possible that it is seized or contains a leak. Remember that replacing the injection pump in the Toyota Yaris 2 Ts is relatively expensive, it is therefore essential to properly distinguish the problem.

Maintaining the injection of your Toyota Yaris 2 Ts

We now offer you a few methods to anticipate injection dysfunctions.

  • Buy one fuel of good quality.
  • Take a ride for about 15 minutes at 3000 rpm once every two or three months. The heat generated by the engine block will then dust the components, and the injection in passing.
  • Drain relatively often.

Now you know what will be the malfunctions related to the injection of the Toyota Yaris 2 Ts and some techniques to get around them. If this concern remains, do not hesitate to go to a professional, because it is a really essential component of the engine block. Post a comment if you have ever used this injection file. See you soon!