When this injection system falls into breakdown it is extremely unpleasant. Usually, this is noticed by fuel effluxes or loss of acceleration. The problem stems from the injectors? from the injection pump? We will answer these questions to properly identify the problem. But first, it's wiser to understand the principle of your injection system .injector-fault-Toyota-Yaris-3-Grmn

Injection system on a Toyota Yaris 3 Grmn: how it works

To function properly, the engine of your Toyota Yaris 3 Grmn needs a mix of air and fuel. It is injector which propels this mixture into the engine. If the injector has a problem, the Toyota Yaris 3 Grmn can hardly start. An injection system is made of pumps and injectors , sometimes gathered via a common rail . The first injection engine was invented in 1893 by Rodolphe Diesel himself.

Injector problem on a Toyota Yaris 3 Grmn: reasons and consequences

Lack of power or acceleration

If the Toyota Yaris 3 Grmn lacks power, or even has power holes, it is probably related to the injector. It remains likely that the latter is dirty due to deposits. This is why it is important to use quality fuel. Make a descaling you will be much cheaper than having the device changed.

Fuel smell

If fuel effluxes are felt, it certainly comes from a fuite . When this is happening, it is better to avoid driving with your Toyota Yaris 3 Grmn. Leaks will be exceptional, however, quite dangerous. So call the mechanic, he will tell you what to do. When it's a joint problem, you're going to be able to afford the repair. Hopefully the injector is not irretrievably HS.

Engine runs but does not start

The problem does not inevitably come from the injector. The reasons may be diverse. If however you ever feel confident that the injector is in question, it is probably because of the injection pump . It may be seized or else have a leak. Remember that changing the injection pump in the Toyota Yaris 3 Grmn is quite expensive, so it's wiser to properly grasp the problem.

Maintaining the injection of your Toyota Yaris 3 Grmn

We now offer you valuable solutions to deal with injection problems.

  • Buy one fuel qualitative.
  • Drive a quarter of an hour to 3000 revolutions per minute Once every two months. The temperature generated by the engine should unclog the components, as well as the injection on passage.
  • Drain fairly frequently.

Now you know what the problems will be in connection with the injection of the Toyota Yaris 3 Grmn and valuable tips if you want to get ahead of them. In the event that this problem does not disappear, do not hesitate to go to a specialist, since it is a frankly important element of the engine. Leave a comment if this injection guide was helpful to you. Good road!