When the injection system falls into breakdown It's very annoying. Generally, it is noticed by fuel effluxes or a loss of power. The problem comes from the injectors? from the injection pump? We will answer these questions to properly determine this problem. But above all, it is essential to understand the principle of the injection system .
Injection system on a Toyota Yaris Ts: how it works
To function properly, the engine of the Toyota Yaris Ts needs a mixture of air and fuel. It is injector which propels this mixture inside the engine. It is for this reason that if the injector has a problem, your Toyota Yaris Ts may not start. The injection system consists of a pumps and injectors , linked regularly via a common rail . The first injection engine was invented in 1893 by Rodolphe Diesel personally.
Injector problem on a Toyota Yaris Ts: reasons and consequences
Lack of power or acceleration
If this Toyota Yaris Ts loses power, or has acceleration holes, it is probably due to the injector. It is conceivable that the latter remains obstructed because of deposits. This is why it is useful to use quality fuel. Perform a descaling you will be less expensive than having the system replaced.
Fuel smell
When fuel effluxes arrive, it must probably come from a fuite . When this is the case, it is better to avoid driving with the Toyota Yaris Ts. Fuel leaks will be rare, however, quite dangerous. So call your mechanic, he will tell you what to do. When it's a joint, you can try a repair. Better that the injector is not irretrievably out of service.
Engine runs but does not start
The problem does not come automatically from the injector. The reasons can be many. If on the other hand you are convinced that the injector is in question, it is probably due to the injection pump . It happens that it is seized or have a leak. Remember that replacing the injection pump of this Toyota Yaris Ts is quite expensive, so it is essential to discern the problem.
Maintaining the injection of your Toyota Yaris Ts
Here are several methods to deal with injection concerns.
- Choose one fuel of a very high quality.
- Roll about fifteen minutes at 3000 rpm Once every two or three months. The heat emitted by the engine should dust the components, as well as the injection while passing.
- Drain fairly regularly.
Now you know what will be the concerns related to the injection of this Toyota Yaris Ts and several techniques if we want to get around them. If this problem persists, do not hesitate to go to a professional, because it is an extremely essential element of the engine. Post a comment if this file on the injection was useful. Good road!