When the injection system falls into breakdown that's really annoying. In general, it is distinguished by fuel fumes or power losses. The problem comes from the injectors? from the injection pump? We will answer these questions to properly identify this concern. But to start with, it's wiser to understand the principle of your injection system .injector-fault-Toyota-Yaris

Injection system on a Toyota Yaris: how it works

To function properly, the engine of the Toyota Yaris uses a mixture of air and fuel. It is injector which gives the possibility of propelling this mixture inside the engine. If the injector has a problem, the Toyota Yaris may have trouble starting. The injection system consists of a pumps and injectors , gathered regularly by a common rail . The first model of injection engine was designed in 1893 by Rodolphe Diesel himself.

Injector problem on a Toyota Yaris: reasons and consequences

Lack of power or acceleration

If this Toyota Yaris lacks power, or has acceleration holes, it is probably related to the injector. It is possible that it remains dirty due to waste. It is for this reason that it is wiser to use a qualitative fuel. Perform a descaling is much less expensive than having this device replaced.

Fuel smell

In the event that fuel fumes arrive, it must probably come from a fuite . If that's the case, avoid driving with the Toyota Yaris. Fuel leaks are rare but relatively dangerous. So call your mechanic, he will explain what to do. If it is ever a joint, you will be able to afford the repair. Hoping that the injector is not completely HS.

Engine runs but does not start

The concern does not inevitably come from the injector. The reasons will be many. When you are certain that the injector is the source, it is probably because of the injection pump . This may be seized or contains a leak. You should know that replacing the injection pump of this Toyota Yaris is relatively expensive, it is therefore wiser to properly distinguish the concern.

Maintaining the injection of your Toyota Yaris

We now offer you valuable techniques to anticipate injection malfunctions.

  • Buy one fuel qualitative.
  • Drive about 15 minutes to 3000 rpm Once every two or three months. The heat generated by the engine will unclog the components, and the injection obviously.
  • Drain relatively often.

Now you know what the malfunctions will be in connection with the injection of this Toyota Yaris and precious methods so as to anticipate them. If this concern remains, you can go to a mechanic, simply because it is an extremely essential component of the engine. Leave us a comment if this text on the injection was useful. Good walk!