La power loss for a Hyundai Portico is a relatively usual symptom. However, the reasons could be various. What can result from a loss of power? Is the motor protected in the event of defaut ? Is it simply a concern for sensor ? We will answer all of these questions in this file, explaining the very recurring reasons. When the Hyundai Portico works properly when you restart the engine, this is probably a concern electronic . If despite everything the concern remains, it is useful to seek the origin. Because it will probably save you from having to replace several parts at your garage.power-loss-Hyundai-Portico

Power loss Hyundai Portico: the most common reasons

We will see here what could be the reasons for your concern and how to solve it.

Hyundai Portico: a concern with flowmeter.

Le lack of power of your Hyundai Portico is sometimes due to a concern of air flow meter. This engine component is used to measure the air mass inside the engine, to increase engine performance tenfold. When this sensor presents a problem, the injectors will no longer send the appropriate amount of fuel. The consequence: a loss of power.

Air compression problem

Whether it's a compressor or a turbo compressor, the problem will be relatively similar. the compressor is used to project the air inside the engine of the Hyundai Portico. If it is damaged, the air level will sometimes drop. As an engine needs an exact mixture of air and fuel to be able to function, its performance may therefore be reduced. Search for a few minutes to diagnose the problem, as it is relatively expensive to change.

Loss of power: a problem with injection?

When your Hyundai Portico exhibits power losses or jerks, injection may be the cause. Do not hesitate to look at our little file on injector failures to better understand the problem. Do not wait too long to take care of this concern, its consequences could be extremely important for your engine.

The particle filter of your Hyundai Portico is clogged

The concern can come from several reasons. In order to limit the impact on the environment, cars now have safety devices. When the FAP is faulty, your car may go into safety and prevent heavy acceleration. The other consequence is natural. The saturated fap prevents the Hyundai Portico engine from ventilating properly. The consequence is therefore a lack of performance.

Lack of acceleration: an electronic fault

This is unfortunately a relatively frequent cause. It is possible that the sensors of the Hyundai Portico, or else the electronic chips have a fault. The signal sent to the on-board computer means that the latter can go into safety mode. This is to avoid permanent problems with the engine. Therefore, if you wish to remedy this problem, inspect the electrical connections of the sensors. This type of problem is usually accompanied by a warning light on your dashboard. Otherwise, you must go to a garage, the diagnosis will be easier to carry out. Be vigilant and have a good ride!