A concern with centralized closure is rather annoying. Sometimes it can also be risky because you can get stuck in it. Depending on the vehicle styles, the centralized locks engage automatically when the doors are closed, for others it must be done alone. We will thus see with this article what are the most usual concerns and what are the solutions to remedy them.problem-closing-centralized-seat-inca

The central locking of your seat inca no longer works

Different symptoms can help you detect the failure. Especially compared to the number of doors that have this problem. Let's take a closer look.

seat inca: the central locking does not work on one of the doors

To start, try to lock the door manually. If there are no complications, this means that your device is in good condition. Your problem therefore comes from another place upstream. In most cases this is a problem from a short circuit. In order to control it it's extremely easy! You will need to disassemble the interior of the door of your seat inca by removing the covers. Follow the electrical wires from the locking device. Therefore check the wiring as well as the good condition of the wiring. You will have to correct the problem you have identified. In the event that, despite everything, the closing is hard manually and with the buttons, this means that it is the device which presents a problem. Don't worry, just lubricate it or replace it with a new one if it is really worn out.

seat inca: central locking does not work at all

This is a problem that remains extremely annoying. The central locking of the seat inca no longer works at all. The origin of the problem is not easy to locate. We will therefore see the most common concerns.

Replace fuses on your seat inca

The problem may come from a fuse wire rack. It is rather convenient to recognize firsthand. In this case you know perfectly what to do, you just need to replace it. It is a rather rare problem but nevertheless it can happen.

General feeding problem

In the event that your automobile has a general power problem, it is very rare that only the closure no longer works. So don't worry, it's certainly not that problem you won't be on this article if it was. However, it is sometimes possible that there is a contact problem from the power supply to the central locking device. You will have to deoxidize the connection or change the wire. It is simple to repair , the most complex is to find the short circuit.

seat inca: Change your key battery

It just happens that the key has no battery left! We can sometimes forget this phenomenon, however it is the key that directs the closure system. In this case, it's even more easy , simply open the key, with a flat screwdriver for example, and replace the battery in the key. Do not hesitate to write a comment if your problem does not appear inside this text, in order to help other Internet users! Enjoy the road.