Behind these buttons you can find quite ingenious systems. Ingenious, however quite often non-functional! Because this remains a problem that we have all had, for a jeep grand cherokee or any automobile. However before changing the system, it is necessary to properly understand where the problem came from. A problem with false contact? Gears stuck? We will try to answer your questions below.problem-window-lift-jeep-grand-cherokee

jeep grand cherokee: a window goes down but does not go up, or vice versa

Before changing the component, let's just understand how this device works. When you press, or raise the button of the famous window, there are two switches in the facts . The electrical connection only goes through when activated. It is thus possible that the problem arises from an electrical fault. Remove the part with the help of a flat screwdriver, and check the electrical wiring at their beginning and at their end. If the problem does not come from an electrical fault, in this situation it is the window regulator motor of your jeep grand cherokee which does not work. It also happens that gears are damaged. You can try to solve the problem, but generally you will need to replace the entire window regulator.

jeep grand cherokee: One window does not work at all

It is rare that the problem comes from the button, since it would be necessary that the two switches or cables are defective at the same time. You can however check if you want to be sure. In this situation, the problem could come from the window regulator mechanism of the grand cherokee jeep. Sometimes it comes from engine window lift, or a defective gear. Remove the door covers to see inside. Activate the window to discern if the engine is running, and find out the cause of the problem. If gears block it is possible to clean and grease them. If nothing happens, you may need to change the mechanism of the entire window regulator.

jeep grand cherokee: Electric window blocked

A window of this jeep grand cherokee is blocked. You try to raise it by pressing the button or manually, nothing happens it remains blocked. This problem could come from the motor of your window regulator, but generally it will be possible to have it mounted manually. It is thus more admissible that the window is out of its rail . By off-center, when you mount the window, the window hangs on one side. In this case, there is no point in forcing anything. It is necessary to open the door and look at what is stuck inside. If the window guides are broken, you will probably have to change them.

Conclusion:

Basically, a window problem on your jeep grand cherokee can come from an electrical problem, the system of your window regulator, or the rails that hold it. Do not hesitate to leave a comment if your problem does not appear above. Hope this guide has helped you, have a good ride!