Under these switches there are rather ingenious mechanisms. Ingenious, but occasionally non-functional! Because this remains a problem that we have all seen, for an Opel Monza or another car. However before changing the device, it is necessary to correctly understand where the malfunction is coming from. An electrical fault malfunction? Gears stuck? We will try to answer all of your questions in this article.window-lift-problem-Opel-Monza

Opel Monza: a window goes down but does not go up, or vice versa

Before changing the part, let's quickly understand how this device works. When you press, or raise the button on your window, there are two switches in reality . The electrical connection goes right when you operate it. It is therefore conceivable that the problem stems from an electrical fault. Remove the block with the help of a flat screwdriver, and observe the electrical wiring from their departure to their arrival. If the malfunction should never come from a bad electrical connection, in this case it is the window lift motor of your Opel Monza that is HS. Gears may also be in poor condition. It is possible to try to correct the problem, but often it will be necessary to replace the entire window regulator.

Opel Monza: One window does not work at all

It is rare that the malfunction comes from the switch, because it would be necessary that the two switches or cables are defective. You can however control if you want to be sure. In this situation, the malfunction will come from the window regulator mechanism of the Opel Monza. The latter may come from engine window lift, or a defective gear. Remove the door trim to examine inside. Operate the window to be able to perceive if the engine is running, and try to understand the cause of the malfunction. When gears block, do not hesitate to dust and lubricate them. When nothing happens, you probably have to change the entire window regulator.

Opel Monza: Electric window blocked

An Opel Monza window is blocked. You try to make it go up by pressing the button or by hand, nothing to do it remains blocked. This malfunction can come from the motor of your window regulator, but often it will be conceivable to have it assembled by hand. It is therefore more admissible that the window is out of its rail . By offsetting, when you mount the window, the latter abuts on the rail. In this case, there is no point in forcing. It is necessary to release the door and look at what is blocking the interior. If the glass guides are broken, you will probably have to change them.

Conclusion:

Basically, a window malfunction on this Opel Monza could come from an electrical malfunction, from the mechanism of your window regulator, or from the rails that guide it. You can leave a comment if your problem is not mentioned in our text. Hope this text has helped, enjoy the road!