Under these buttons you can find relatively ingenious systems. Ingenious, however quite often non-functional! Because it remains a concern that we have all seen, on a Seat Ateca or another car. However before changing your mechanism, it will be necessary to know properly what caused the malfunction. Contact malfunction? Gears seized? We will try to answer all of your questions so this tutorial.window-lift-problem-Seat-Ateca

Seat Ateca: a window goes down but does not go up, or vice versa

Before changing the part, let's quickly study how this device works. When you press, or push up the button on the famous window, there are two switches in practice . The electrical connection flows just when it is activated. It is therefore likely that the concern comes from an electrical fault. Remove the part with the help of a flat screwdriver, and inspect the electrical wiring when they leave upon arrival. If the malfunction does not come from a false contact, then the window regulator motor in your Seat Ateca does not work. It is also possible that gears are damaged. It is possible to try to repair the problem, but often it will be necessary to replace the entire window regulator.

Seat Ateca: One window does not work at all

It is rather exceptional that the malfunction occurs from the switch, since two switches or cables would have to be defective. However, you can check if you want to be sure. Therefore, the malfunction will certainly come from the window regulator mechanics of your Seat Ateca. It is possible that it comes from engine window lift, or a defective gear. Remove the door covers to check inside. Open the window to see if the engine is running, and try to understand the causes of the malfunction. If any gears jam, it is possible to clean and grease them. If nothing happens, you will probably have to change the entire window regulator.

Seat Ateca: Electric window blocked

A window in your Seat Ateca is blocked. You try to raise it by pressing the button or by hand, nothing to do it remains stuck. This malfunction can come from the motor of the window regulator, but often it will be conceivable to have it assembled by hand. It is therefore much more likely that the glass came out of its rail . When off-center, when you mount the window, it will come up against one side. In these cases, there is no point in forcing. It is necessary to clear the door and check what gets stuck in it. If the window guides ever prove to be damaged, you will probably have to change them.

Conclusion:

Basically, a window malfunction on your Seat Ateca can be the result of an electrical malfunction, of the window regulator mechanism, or of the rails which guide it. Do not hesitate to write a comment if your concern is not mentioned above. Hope this text has helped you, be careful!