Under these switches there are quite ingenious systems. Ingenious, but quite often defective! Because this remains a concern that we have all known, on a Smart Crosstown or any automobile. However before replacing the mechanism, it is necessary to know well where the problem comes from. A concern for contact? Gears stuck? We will try to answer all of your questions so this tutorial.problem-window-lift-Smart-Crosstown

Smart Crosstown: a window goes down but does not go up, or vice versa

Before replacing the part, let's just study how this device works. When you push or lift the button on your window, there are two switches in practice . The electrical connection only flows when you operate it. It is therefore likely that the concern comes from a false contact. Remove the part with a flat screwdriver, then examine the electrical wiring when they leave upon arrival. If the problem is not due to a bad electrical connection, then the window regulator motor of your Smart Crosstown is the cause. It also happens that gears happen to be in poor condition. Do not hesitate to try to troubleshoot the problem, but often it will be necessary to replace the entire window regulator.

Smart Crosstown: One window doesn't work at all

It is rare that the problem comes from the button, because the two switches or cables should be faulty. You can however control if you want to be sure. In this situation, the concern will come from the window regulator mechanics of the Smart Crosstown. It happens that this one comes from engine window regulator, or a damaged gear. Remove the door trim to check inside. Operate the window to see if the engine is running, and try to understand the source of the problem. In case gears get stuck you can clean and lubricate them. In the event that nothing happens, you will probably have to change the mechanism of the entire window regulator.

Smart Crosstown: Electric window blocked

A window of the Smart Crosstown is blocked. You try to raise it by pressing the button or by hand, nothing to do it remains stuck. This problem could come from the window regulator motor, but often it will be possible to have it assembled by hand. It is therefore much more plausible that the glass came out of its rail . By offsetting, as soon as you mount the window, it locks on one of the sides. In this case, there is no point in forcing anything. It will be necessary to release the door and to look at what gets stuck inside. If the glass guides prove to be faulty, you will probably have to replace them.

Conclusion:

To put it simply, a glass problem on this Smart Crosstown could come from a problem linked to a false contact, of the mechanism of the window regulator, or of the rails which guide it. We invite you to leave us a comment if your concern does not appear in our text. Hoping this guide has helped, be careful!