Behind these switches are some pretty ingenious systems. Ingenious, but occasionally non-functional! Because it remains a malfunction that we have all seen, for a Citroen Tubik or any automobile. However before changing your mechanism, you just need to know where the problem is coming from. A problem with false contact? Gears seized? We will try to answer all of your questions below.window-lift-problem-Citroen-Tubik

Citroen Tubik: a window goes down but does not go up, or vice versa

Before changing the element, let's just see how it works. When you push in or raise the switch on your window, you can find two switches in practice . The electrical signal only circulates when it is activated. It is thus probable that the dysfunction comes from a false contact. Remove the part with the help of a flat screwdriver, and observe the electrical wiring at their beginning and at their end. If the problem does not come from a bad electrical connection, in this case it is the window regulator motor of your Citroen Tubik that does not work. It also happens that gears are found to be worn. Do not hesitate to try to correct the malfunction, but in general you will have to replace the entire window regulator.

Citroen Tubik: One window does not work at all

It is rather exceptional that the problem comes from the switch, since it would be necessary that the two switches or cables are defective at the same time. You will however be able to control if you wish to be convinced of this. From then on, the problem will come from the mechanics of the window regulator of the Citroen Tubik. It happens that the latter comes from engine window regulator, or a damaged gear. Remove the door trim to look inside. Activate the window to see if the engine is running, and try to understand the source of the problem. If gears get stuck it is possible to dust and grease them. If nothing happens, you will likely need to replace the entire window mechanism.

Citroen Tubik: Electric window blocked

A window of the Citroen Tubik is blocked. You try to make it go up by actuating the switch or manually, nothing happens it is blocked. This problem can come from the motor of your window regulator, but in general it will be conceivable to have it mounted manually. It is thus much more likely that the window has come out of its rail . By moving, as soon as you mount the window, the latter abuts on one of the sides. In these cases, you should not force force. You have to open the door and look at what gets stuck inside. If the glass guides are broken, you will probably have to change them.

Conclusion:

To summarize, a glass problem on your Citroen Tubik can result from a problem related to a false contact, of the mechanism of your window regulator, or of the rails which hold it. We invite you to write a comment if your dysfunction is not cited in our text. Hope this article has helped you, be careful!