Beneath these buttons are relatively ingenious systems. Ingenious, but quite often defective! Because it is a malfunction that we have all seen, for a Hyundai I-mode or another automobile. But before replacing the system, it will be necessary to properly understand what caused the problem. An electrical fault concern? Gears seized? We will try to answer all of your questions with this article.
Hyundai I-mode: a window goes down but does not go up, or vice versa
Before replacing the part, let's just study how it works. When you press, or push up the button on the famous window, there are two switches in the facts . The electrical connection flows just when you operate it. It is therefore likely that the malfunction comes from an electrical fault. Remove the part with the help of a flat screwdriver, then observe the cables as they leave when they arrive. If the concern is not the result of a false contact, in this case it is the window regulator motor of your Hyundai I-mode that is involved. Gears may also be in poor condition. Do not hesitate to try to resolve the malfunction, but often it will be necessary to change the entire window regulator.
Hyundai I-mode: One window does not work at all
It is rather exceptional that the concern comes from the button, since it would be necessary that two connections or cables are faulty. However, you can check if you want to be sure. In this situation, the concern will certainly come from the mechanics of the window regulator of the Hyundai I-mode. It may come from engine window regulator, or a damaged gear. Remove the door trim to see inside. Operate the window to be able to see if the engine is running, and try to grasp the source of the problem. If gears get stuck you can dust and grease them. If nothing ever happens, you will probably have to change the mechanism of the entire window regulator.
Hyundai I-mode: Electric window blocked
A window in your Hyundai I-mode is blocked. You try to make it go up by pressing the button or by hand, nothing happens it remains blocked. This concern can come from the motor of your window regulator, but often it will be possible to have it assembled by hand. It is therefore much more likely that the window has come out of its rail . By decentering, when you mount the window, the latter abuts on the rail. In this situation, there is no point in forcing anything. It will be necessary to release the door and to go to see what blocks in it. If the window guides fail, you may need to replace them.
Conclusion:
Basically, a glass problem on this Hyundai I-mode could be the result of an electric problem, the mechanism of your window regulator, or the rails that guide it. Do not hesitate to post a comment if your dysfunction does not appear in our text. Hope this text has served you well, enjoy the road!