Under these little buttons there are some pretty ingenious systems. Ingenious, but often non-functional! Because it's a problem we've all seen, for a Hyundai I30 (3rd Generation) N or another car. But before replacing your device, you just need to properly understand what the problem is. An electrical fault problem? Are the gears stuck? We will try to answer your questions below.
Hyundai I30 (3rd Generation) N: a window goes down but does not go up, or vice versa
Before replacing the element, let's just see how this device works. When you press, or wind up the button on your window, we can find two switches in practice . The electrical connection only circulates when it is activated. It is indeed possible that the problem comes from an electrical fault. Remove the part using a flat screwdriver, and examine the electrical wiring as they leave when they arrive. If the problem does not come from a poor contact, in this case it is the window regulator motor of your Hyundai I30 (3rd Generation) N that does not work. It is also possible that the gears are damaged. Do not hesitate to try to correct the problem, but in general you will have to replace the entire window regulator.
Hyundai I30 (3rd Generation) N: One window does not work at all
It is not often that the problem arises from the button, as both switches or cables would have to be defective. However, you can check if you want to be sure. In this situation, the problem could come from the mechanics of the window regulator of your Hyundai I30 (3rd Generation) N. It could be that it comes from the engine window regulator, or a faulty gear. Remove the door trim to see inside. Activate the window to be able to see if the engine is running, and try to find out the cause of the problem. If the gears get stuck, it is possible to clean and lubricate them. In the event that nothing happens, it will certainly be necessary to change the entire window regulator device.
Hyundai I30 (3rd Generation) N: Electric window blocked
A window of the Hyundai I30 (3rd Generation) N is blocked. You try to raise it by pressing the button or by hand, nothing happens it is blocked. This problem can come from the motor of your window regulator, but in general it will be possible to reassemble it by hand. It is in fact much more plausible that the window has come out of its rail . By shifting, when you raise the window, it hangs on one side. In these cases, do not force it. We will have to clear the door and go see what is blocking inside. If the window guides are damaged, you will probably have to replace them.
Conclusion:
To put it simply, a problem with the glass on your Hyundai I30 (3rd Generation) N could be the result of an electrical problem, with the mechanism of your window regulator, or the rails that hold it. Do not hesitate to leave us a comment if your problem does not appear in our text. Hope this guide has helped you, have a nice trip!