Under these switches there are relatively ingenious systems. Ingenious, but often defective! Because it remains a malfunction that we have all seen, for a hyundai i30 or any automobile. Before changing the system, however, it is important to understand what is causing the malfunction. Contact malfunction? Gears stuck? We will try to answer your questions so this tutorial.problem-WINDOW-Hyundai-i30

hyundai i30: a window goes down but does not go up, or vice versa

Before changing the element, let's just see how this device works. When you push or lift the button on your window, you can find two switches in the facts . The electrical connection runs just when you operate it. It is therefore likely that the malfunction comes from an electrical fault. Remove the part with a flat screwdriver, and observe the electrical wiring when they leave when they arrive. If the malfunction does not come from an electrical fault, in this case it is the window regulator motor of your hyundai i30 that is HS. It is also possible that gears are found to be in poor condition. Do not hesitate to try to resolve the malfunction, but in general you will have to replace the entire window regulator.

Hyundai i30: One window does not work at all

It is rather exceptional that the malfunction comes from the button, since it would be necessary that the two connections or cables are defective. However, you can control if you want to be sure. In this case, the malfunction will come from the window mechanism of your hyundai i30. It is possible that it comes from engine window regulator, or a damaged gear. Remove the door trim to see inside. Activate the window to see if the engine is running, and try to understand the causes of the malfunction. When gears block it is possible to dust and grease them. When nothing happens, it is probably necessary to change the entire window regulator mechanism.

hyundai i30: Electric window blocked

A window of your hyundai i30 is blocked. You try to raise it by pressing the button or by hand, nothing to do it remains blocked. This malfunction can come from the motor of your window regulator, but in general it will be possible to have it assembled by hand. It is therefore more admissible that your window has come out of its rail . By offsetting, as soon as you mount your window, it abuts on one side. In this case, there is no point in forcing anything. It is necessary to open the door and go to see what is blocking inside. If the glass guides are broken, you will probably have to change them.

Conclusion:

To put it simply, a glass malfunction on your hyundai i30 can come from an electric malfunction, from your window regulator system, or from the rails that hold it. We invite you to leave us a comment if your malfunction is not mentioned above. Hoping that this post helped, good ride!