Behind these switches are some pretty ingenious mechanisms. Ingenious, but quite often failing! Because this remains a problem that we have all known, for a Hyundai Ix20 or any automobile. Before replacing the mechanism, however, you just need to understand properly what is causing the problem. Contact problem? Gears stuck? We will try to answer your questions below.problem-WINDOW-Hyundai-Ix20

Hyundai Ix20: a window goes down but does not go up, or vice versa

Before replacing the part, let's just see how this device works. When you push in or raise the switch on your window, there are two switches in practice . The electrical signal only flows when activated. It is in fact possible that the problem originated from a false contact. Remove the block with the help of a flat screwdriver, and check the cables when they leave when they arrive. If the problem does not come from a false contact, in this situation it is the window regulator motor of your Hyundai Ix20 which is HS. Gears may also be damaged. It is possible to try to solve the problem, but often you will have to replace the entire window regulator.

Hyundai Ix20: One window does not work at all

It is rather exceptional that the problem comes from the switch, because it would be necessary that the two connections or cables are faulty. You can however check if you wish to be convinced. In this case, the problem could come from the window regulator mechanics of your Hyundai Ix20. The latter may come from engine window regulator, or a damaged gear. Remove the door trim to see inside. Activate the window to see if the engine is running, and find out what is causing the problem. When gears get stuck it is possible to clean and lubricate them. When nothing happens, you will probably need to change the entire window regulator system.

Hyundai Ix20: Electric window blocked

A window of this Hyundai Ix20 is blocked. You try to reassemble it by pressing the switch or by hand, nothing to do it is stuck. This problem can come from the motor of your window regulator, but often it will be conceivable to wind it by hand. It is actually much more possible that your window is out of its rail . By moving, as soon as you mount your window, it hangs on one side. In this situation, there is no point in forcing anything. You will have to open the door and check what gets stuck inside. If the glass guides are faulty, you will probably have to replace them.

Conclusion:

To summarize, a glass problem on your Hyundai Ix20 can result from a problem related to a false contact, the system of your window regulator, or the rails which hold it. You can post a comment if your problem is not mentioned in our text. Hope this article has helped you, good ride!