Under these buttons there are relatively ingenious mechanisms. Ingenious, however from time to time non-functional! Because it is a malfunction that we have all seen, for a Hyundai Kona or any car. But before replacing your device, it is necessary to properly understand what is causing the problem. An electrical fault problem? Gears seized? We will try to answer your questions with this article.window-lift-problem-Hyundai-Kona

Hyundai Kona: a window goes down but does not go up, or vice versa

Before replacing the part, let's quickly study how this device works. When you press, or push up the button of the famous window, there are two switches in practice . The electrical signal flows just when it is activated. It is therefore conceivable that the malfunction is due to a false contact. Remove the block with the help of a flat screwdriver, and check the electrical wiring when they leave when they arrive. If the problem does not come from a false contact, in this situation it is the window regulator motor of your Hyundai Kona that is involved. It is also possible that gears are damaged. You can try to resolve the malfunction, but in general it will be necessary to change the entire window regulator.

Hyundai Kona: One window doesn't work at all

It is rare that the problem comes from the button, since it would be necessary that two switches or cables are defective at the same time. You can, however, watch if you want to be sure. In this situation, the problem will come from the mechanism of the window regulator of the Hyundai Kona. The latter may come from engine window lifter, or a faulty gear. Remove the door covers to check inside. Activate the window to be able to discern if the engine is running, and try to grasp the causes of the problem. When gears block you can dust and lubricate them. When nothing happens, it is certainly necessary to change the mechanism of the entire window regulator.

Hyundai Kona: Electric window blocked

A window of this Hyundai Kona is stuck. You try to raise it by pressing the button or manually, nothing happens it is blocked. This problem can come from the motor of your window regulator, but in general it will be conceivable to have it assembled manually. It is therefore much more likely that the window has come out of its rail . By off-center, as soon as you mount the window, it comes up against one side. In this situation, do not force force. We will have to clear the door and check what is blocking inside. If the window guides prove to be damaged, you will certainly have to replace them.

Conclusion:

To sum up, a glass problem on your Hyundai Kona could come from an electrical problem, the mechanism of your window regulator, or the rails that hold it. We invite you to post a comment if your dysfunction does not appear above. Hope this article has helped, good ride!