Behind these switches you can find quite ingenious mechanisms. Ingenious, but from time to time failing! Because this remains a concern that we have all had, for a Hyundai Scoupe or any automobile. However before changing your system, it is necessary to properly know where the malfunction is coming from. Contact malfunction? Gears stuck? We will try to answer all your questions so this tutorial.
Hyundai Scoupe: a window goes down but does not go up, or vice versa
Before changing the component, let's just see how this device works. When you press, or push up the button of the famous window, there are two switches in the facts . The electrical signal only passes when you activate it. It is therefore conceivable that the problem arises from an electrical fault. Remove the block with a flat screwdriver, and inspect the cables when they leave when they arrive. If the malfunction does not come from a false contact, then the window lift motor of your Hyundai Scoupe does not work. It is also possible that gears are damaged. It is possible to try to fix the problem, but often it is necessary to change the entire window regulator.
Hyundai Scoupe: One window doesn't work at all
It is not frequent that the malfunction comes from the button, since it would be necessary that the two connections or cables are defective. You can, however, check if you want to be sure. In this situation, the malfunction could come from the window regulator mechanism of your Hyundai Scoupe. It may be that it comes from engine window regulator, or a damaged gear. Remove the door covers to examine the interior. Operate the window to discern if the engine is running, and try to understand the causes of the malfunction. If gears get stuck you can dust and grease them. If nothing ever happens, you will probably have to change the entire window regulator.
Hyundai Scoupe: Electric window blocked
A window in your Hyundai Scoupe is blocked. You try to reassemble it by pressing the button or manually, nothing to do it remains stuck. This malfunction can come from the motor of your window regulator, but often it will be conceivable to wind it manually. It is therefore much more possible that your window is out of its rail . By offsetting, as soon as you mount your window, the window hangs on one side. In these cases, there is no point in forcing anything. You will have to clear the door and check what is blocking inside. If the glass guides are found to be damaged, you may need to change them.
Conclusion:
Basically, a window malfunction on a Hyundai Scoupe could be the result of a malfunction related to a false contact, the mechanism of your window regulator, or the rails that hold it. We invite you to leave a comment if your concern does not appear in our text. Hoping that this text has been useful to you, have a good trip!