Behind these little buttons you can find relatively ingenious mechanisms. Ingenious, but quite often non-functional! Because it remains a malfunction that we have all seen, for a hyundai tucson or any car. However before replacing the device, it will be necessary to understand what the problem comes from. Contact problem? Gears stuck? We will try to answer all the questions with this article.
hyundai tucson: a window goes down but does not go up, or vice versa
Before replacing the part, let's just look at how it works. When you push in or raise the switch on your window, there are two switches in the facts . The electrical signal only flows when activated. It is therefore likely that the malfunction comes from a false contact. Remove the part with a flat screwdriver, then observe the electrical wiring when they leave when they arrive. If the problem does not come from a false contact, then the window regulator motor in your hyundai tucson does not work. It also happens that gears happen to be in poor condition. You can try to repair the malfunction, but generally you will need to replace the entire window regulator.
hyundai tucson: One window does not work at all
It is not very frequent that the problem arrives from the switch, since it would be necessary that two switches or cables are faulty. You can however control if you wish to be certain. Therefore, the problem could come from the window regulator mechanism of your hyundai tucson. It happens that this one comes from engine window regulator, or a damaged gear. Remove the door trim to see inside. Operate the window to see if the engine is running, and try to understand the cause of the problem. If any gears jam, do not hesitate to clean and lubricate them. If nothing ever happens, you must certainly change the entire window regulator system.
hyundai tucson: Electric window blocked
A window of this hyundai tucson is blocked. You try to reassemble it by actuating the switch or by hand, nothing happens it is blocked. This problem can come from the window regulator motor, but generally it will be possible to reassemble it by hand. It is therefore more possible that the glass has come out of its rail . By offsetting, when you mount the window, the latter abuts on the rail. In this situation, do not force force. It is necessary to release the door and check what gets stuck in it. If the window guides prove to be faulty, you should certainly replace them.
Conclusion:
To put it simply, a glass problem on a hyundai tucson could come from an electrical problem, from the window regulator system, or from the rails which hold it. We invite you to post a comment if your dysfunction does not appear above. Hoping this ticket has served you well, enjoy the ride!