Under these switches there are quite ingenious systems. Ingenious, however quite often non-functional! Because it is a malfunction that we have all had, on an Iveco Eurocargo or any automobile. However before replacing the device, it will be necessary to know correctly where the problem comes from. A problem with false contact? Gears stuck? We will try to answer your questions with this article.window-lift-problem-Iveco-Eurocargo

Iveco Eurocargo: a window goes down but does not go up, or vice versa

Before replacing the part, let's quickly understand how this device works. When you press, or raise the switch on your window, there are two switches in the facts . The electrical signal only passes when activated. It is thus possible that the malfunction comes from an electrical fault. Remove the part with a flat screwdriver, and check the cables when they leave when they arrive. If the problem never stems from an electrical fault, then the window regulator motor in your Iveco Eurocargo does not work. It is also possible that gears are damaged. You can try to fix the malfunction, but generally you will have to change the complete window regulator.

Iveco Eurocargo: One window doesn't work at all

It is not frequent that the problem comes from the button, since it would be necessary that the two connections or cables are defective at the same time. You can still control if you want to be convinced. Therefore, the problem will certainly come from the window regulator mechanics of your Iveco Eurocargo. It may come from engine window lifter, or a faulty gear. Remove the door trim to look inside. Open the window to see if the engine is running, and try to grasp the causes of the problem. If any gears jam, don't hesitate to dust and grease them. If nothing happens, you will probably have to change the mechanism of the entire window regulator.

Iveco Eurocargo: Electric window blocked

A window of the Iveco Eurocargo is blocked. You try to reassemble it by pressing the switch or by hand, nothing happens it gets stuck. This problem can come from the window regulator motor, but generally it will be conceivable to wind it by hand. It is thus much more admissible that the window has come out of its rail . By off-center, as soon as you mount the window, the window hangs on one side. In this situation, there is no point in forcing anything. We will have to open the door and look at what is blocking the interior. If the glass guides are broken, you will probably have to replace them.

Conclusion:

Basically, a glass problem on this Iveco Eurocargo can be the result of an electrical problem, the window regulator system, or the rails that hold it. Do not hesitate to leave us a comment if your dysfunction is not cited in our text. Hoping that this file has helped, be careful!