Behind these buttons are some pretty ingenious systems. Ingenious, however, sometimes failing! Because it remains a problem that we have all seen, on an Iveco Massif or another car. But before replacing your system, you will need to know properly what is causing the problem. An electrical fault problem? Gears seized? We will try to answer all of your questions so this tutorial.
Iveco Massif: a window goes down but does not go up, or vice versa
Before replacing the component, let's quickly see how this device works. When you press, or push up the button on the famous window, there are two switches in practice . The electrical connection goes only when you activate it. It is in fact possible that the problem originated from a false contact. Remove the part using a flat screwdriver, and observe the cables as they leave when they arrive. If the problem does not come from an electrical fault, then the window regulator motor of your Iveco Massif is the cause. Gears may also be worn. You can try to fix the problem, but often you have to replace the complete window regulator.
Iveco Massif: One window does not work at all
It is rare that the problem comes from the switch, since it would be necessary that the two switches or cables are defective at the same time. However, you can check if you want to be sure. Therefore, the problem will certainly come from the window regulator mechanics of the Iveco Massif. The latter may come from engine window lifter, or a faulty gear. Remove the door trim to see inside. Activate the window to see if the engine is running, and find out the source of the problem. When gears block, do not hesitate to clean and grease them. When nothing happens, it will certainly be necessary to change the mechanism of the entire window regulator.
Iveco Massif: Electric window blocked
A window of this Iveco Massif is stuck. You try to raise it by pressing the button or by hand, nothing to do it is stuck. This problem can come from the motor of your window regulator, but often it will be conceivable to have it assembled by hand. It is actually much more plausible that the glass came out of its rail . By offsetting, when you mount the window, it locks on one side. In these cases, there is no point in forcing anything. You will have to open the door and look at what is stuck inside. If the glass guides ever fail, you will certainly have to replace them.
Conclusion:
Basically, a glass problem on this Iveco Massif could come from a problem related to a false contact, of the system of your window regulator, or of the rails which maintain it. We invite you to write a comment if your problem is not mentioned in our text. Hope this article has served you well, be careful!