Under these little buttons you can find rather ingenious mechanisms. Ingenious, but often defective! Because it remains a malfunction that we have all seen, for a Jeep Renegade or any car. But before replacing the mechanism, it will be necessary to properly understand where the problem comes from. A concern for contact? Gears stuck? We will try to answer all your questions so this tutorial.problem-window-lift-Jeep-Renegade

Jeep Renegade: a window goes down but does not go up, or vice versa

Before replacing the part, let's quickly understand how it works. When you push in or raise the switch on the famous window, there are two switches in practice . The electrical connection only flows when you operate it. It is indeed possible that the malfunction is due to an electrical fault. Remove the part with the help of a flat screwdriver, and check the cables when they leave when they arrive. If the concern should not come from an electrical fault, in this case it is the window lift motor of your Jeep Renegade that is HS. It is also possible that gears are damaged. Do not hesitate to try to troubleshoot the malfunction, but in general it will be necessary to change the entire window regulator.

Jeep Renegade: One window doesn't work at all

It is rare that the problem comes from the button, because it would be necessary that the two connections or cables are defective. You can however check if you want to be sure. In this case, the concern will certainly come from the mechanism of the window regulator of the Jeep Renegade. It may be that it comes from engine window regulator, or a damaged gear. Remove the door trim to look inside. Operate the window to be able to perceive if the engine is running, and try to find the source of the problem. In case gears get stuck it is possible to clean and grease them. In the event that nothing happens, you will probably have to change the entire window regulator system.

Jeep Renegade: Electric window blocked

A window of your Jeep Renegade is stuck. You try to reassemble it by pressing the switch or manually, nothing happens it is blocked. This problem can come from the motor of your window regulator, but in general it will be possible to wind it manually. It is actually much more possible that the glass came out of its rail . By decentering, when you mount the window, it abuts on the rail. In these cases, you should not force force. You will have to open the door and check what is stuck inside. If the glass guides are found to be broken, you will probably need to replace them.

Conclusion:

To put it simply, a glass problem on this Jeep Renegade could arise from a problem related to a false contact, of the system of your window regulator, or of the rails which guide it. Do not hesitate to leave a comment if your dysfunction is not cited in our text. Hoping that this file has helped, be careful!