Under these little buttons you can find rather ingenious mechanisms. Ingenious, but often defective! Because it remains a problem that we have all known, for a Jeep Willys or another car. But before replacing your mechanism, you have to understand what caused the problem. A problem with false contact? Gears seized? We will try to answer all of your questions with this article.
Jeep Willys: a window goes down but does not go up, or vice versa
Before replacing the element, let's just understand how it works. When you press, or raise the switch of the famous window, we can find two switches in the facts . The electrical connection only flows when activated. It is therefore conceivable that the problem comes from a false contact. Remove the block with the help of a flat screwdriver, then examine the electrical wiring when they leave upon arrival. If the problem does not come from an electrical fault, in this case it is the window lift motor of your Jeep Willys which does not work. It is also possible that gears are damaged. It is possible to try to correct the problem, but often it will be necessary to change the complete window regulator.
Jeep Willys: One window doesn't work at all
It is not very frequent that the problem arrives from the switch, because it would be necessary that the two switches or cables are faulty. You can however control if you want to be sure. Therefore, the problem will surely come from the window regulator mechanism of your Jeep Willys. The latter may be from engine window lifter, or a faulty gear. Remove the door covers to examine inside. Open the window to see if the engine is running, and find out what is causing the problem. In case gears block you can clean and grease them. In the event that nothing happens, you will certainly need to replace the entire window regulator system.
Jeep Willys: Electric window blocked
A window of your Jeep Willys is blocked. You try to raise it by pressing the switch or by hand, nothing happens it remains blocked. This problem can come from the motor of the window regulator, but often it will be conceivable to have it assembled by hand. It is therefore much more admissible that the glass has come out of its rail . By offsetting, when you mount the window, the window hangs on the rail. In this case, there is no point in forcing anything. It is necessary to release the door and check what gets stuck in it. If the glass guides are ever damaged, you should definitely replace them.
Conclusion:
To summarize, a glass problem on this Jeep Willys can come from a problem related to a false contact, of the mechanism of the window regulator, or of the rails which hold it. You can write a comment if your problem is not mentioned in our text. Hoping that this text has helped, have a good ride!