Under these switches one can find quite ingenious mechanisms. Ingenious, yet occasionally defective! Because it remains a malfunction that we have all already had, for a Seat 132 or any car. But before changing your mechanism, it is necessary to correctly know where the problem is coming from. An electrical fault problem? Are the gears seized? We will try to answer all the questions so this tutorial.window-lift-problem-Seat-132

Seat 132: a window goes down but does not go up, or vice versa

Before we change the element, let's just see how it works. When you press or lift the switch on your window, there are two switches in reality . The electrical connection flows just when it is activated. It is therefore possible that the malfunction comes from a bad contact. Remove the block with the help of a flat screwdriver, then observe the cables at their beginning and at their end. If the problem does not come from a bad electrical connection, in this case it is the window regulator motor of your Seat 132 that does not work. It is also possible that gears are worn. You can try to correct the problem, but in general you will have to change the entire window regulator.

Seat 132: A single window does not work at all

It is rather exceptional that the problem arises from the button, because it would be necessary that the two switches or cables are defective at the same time. You can however check if you want to be sure. Therefore, the problem could come from the mechanics of the window regulator of the Seat 132. It is possible that it comes from the engine window regulator, or a defective gear. Remove the door covers to check inside. Operate the window so that you can see if the engine is running, and try to find the cause of the problem. In the event that gears get stuck, do not hesitate to clean and lubricate them. If nothing happens, it is certainly necessary to replace the entire window regulator system.

Seat 132: Electric window blocked

A window of the Seat 132 is blocked. You try to raise it by pressing the switch or manually, nothing to do it gets stuck. This problem can come from the motor of the window regulator, but in general it will be conceivable to raise it manually. It is therefore much more acceptable that the window has come out of its rail . By decentring, as soon as you raise the window, it comes up against the rail. In these cases, do not force it. It is necessary to clear the door and see what is stuck inside. If ever the window guides prove to be faulty, they will certainly have to be changed.

Conclusion:

To put it simply, a problem with the window on this Seat 132 could be the result of a problem related to a poor contact, the window regulator mechanism, or the rails that guide it. We invite you to leave us a comment if your dysfunction does not appear in our text. Hope this article has helped you, enjoy the road!