Behind these little buttons there are relatively ingenious mechanisms. Ingenious, however sometimes non-functional! Because it is a malfunction that we have all seen, for a Seat Ginebra or another car. But before replacing your mechanism, you just need to properly understand what caused the malfunction. An electrical fault malfunction? Gears stuck? We will try to answer all of the questions below.window-lift-problem-Seat-Ginebra

Seat Ginebra: a window goes down but does not go up, or vice versa

Before replacing the element, let's just see how this device works. When you press, or raise the switch of the famous window, we can find two switches in reality . The electrical connection runs just when you operate it. It is therefore conceivable that the malfunction comes from an electrical fault. Remove the block with the help of a flat screwdriver, and observe the cables at their beginning and at their end. If the malfunction does not come from an electrical fault, in this situation it is the window regulator motor of your Seat Ginebra that does not work. It is also possible that gears are found to be in poor condition. You can try to troubleshoot the malfunction, but usually you will need to replace the entire window regulator.

Seat Ginebra: One window doesn't work at all

It is not frequent that the malfunction comes from the button, because it would be necessary that the two switches or cables are faulty. You can still check if you want to be sure. In this case, the malfunction will come from the window regulator mechanism of the Seat Ginebra. It is possible that the latter comes from engine window lifter, or a faulty gear. Remove the door covers to look inside. Operate the window to be able to perceive if the engine is running, and try to understand the cause of the malfunction. In case gears block it is possible to dust and grease them. In the event that nothing happens, you will probably have to change the mechanism of the window regulator in its entirety.

Seat Ginebra: Electric window blocked

A window in your Seat Ginebra is stuck. You try to make it go up by pressing the switch or manually, nothing to do it remains blocked. This malfunction can come from the motor of your window regulator, but usually it will be conceivable to have it mounted manually. It is therefore much more plausible that your window is out of its rail . By off-center, as soon as you mount your window, the latter abuts on one of the sides. In this case, there is no point in forcing anything. You have to clear the door and check what is blocking it. If the window guides fail, you will probably need to replace them.

Conclusion:

To put it simply, a window malfunction on your Seat Ginebra could come from a malfunction linked to a false contact, of the mechanism of your window regulator, or of the rails which hold it. Do not hesitate to leave a comment if your dysfunction is not cited in our text. Hope this guide has helped you, good ride!