Behind these switches you can find quite ingenious mechanisms. Ingenious, but often defective! Because it remains a concern that we have all had, on a Seat Ronda or any automobile. However before changing the system, it will be necessary to properly understand where the malfunction comes from. A malfunction of false contact? Gears stuck? We will try to answer your questions in this article.window-lift-problem-Seat-Ronda

Seat Ronda: a window goes down but does not go up, or vice versa

Before changing the part, let's quickly study how this device works. When you press or raise the switch for the famous window, there are two switches in practice . The electrical signal flows just when you operate it. It is therefore possible that the concern comes from a false contact. Remove the part using a flat screwdriver, then check the electrical wiring when they leave when they arrive. If the malfunction never comes from an electrical fault, in this case it is the window regulator motor of your Seat Ronda that is involved. It is also possible that gears are damaged. It is possible to try to resolve the problem, but often it is necessary to change the entire window regulator.

Seat Ronda: One window doesn't work at all

It is rare that the malfunction comes from the switch, since two switches or cables would have to be faulty. You will however be able to control if you wish to be persuaded of it. In this situation, the malfunction could come from the window regulator mechanics of the Seat Ronda. It is possible that it comes from engine window lift, or a defective gear. Remove the door trim to check inside. Activate the window to discern if the engine is running, and try to grasp the cause of the malfunction. If gears block, do not hesitate to clean and grease them. If nothing happens, you will probably need to have the entire window regulator system changed.

Seat Ronda: Electric window blocked

A window in this Seat Ronda is blocked. You try to reassemble it by actuating the switch or manually, nothing to do it is blocked. This malfunction could come from the window regulator motor, but often it will be possible to wind it manually. It is therefore much more admissible that your window has come out of its rail . By offsetting, as soon as you mount your window, the latter abuts on one of the sides. In these cases, there is no point in forcing. We will have to free the door and look at what is blocking it. If the glass guides ever prove to be damaged, you will probably have to change them.

Conclusion:

To sum up, a window malfunction on this Seat Ronda could be the result of an electrical malfunction, of the window regulator mechanism, or of the rails which hold it. You can write a comment if your concern is not mentioned above. Hope this article has helped you, be careful!