Behind these switches are some pretty ingenious systems. Ingenious, but quite often failing! Because it is a malfunction that we have all known, for a Suzuki Alto or any car. But before changing the mechanism, it is necessary to fully understand where the malfunction came from. A malfunction of false contact? Gears stuck? We will try to answer all your questions with this article.
Suzuki Alto: a window goes down but does not go up, or vice versa
Before changing the element, let's just study how it works. When you push in or raise the switch on your window, you can find two switches in the facts . The electrical signal flows just when it is activated. It is therefore conceivable that the dysfunction comes from a false contact. Remove the part with a flat screwdriver, then examine the cables at their beginning and at their end. If the malfunction does not come from a false contact, in this case it is the window lift motor of your Suzuki Alto that is at fault. It is also possible that the gears are in poor condition. You can try to troubleshoot the malfunction, but usually it is necessary to change the entire window regulator.
Suzuki Alto: One window doesn't work at all
It is not frequent that the malfunction comes from the button, since it would be necessary that two connections or cables are defective. However, you will be able to control whether you wish to be convinced of this. In this case, the malfunction may come from the mechanics of the window regulator in the Suzuki Alto. It is possible that this one comes from engine window regulator, or a damaged gear. Remove the door covers to examine inside. Activate the window to be able to discern if the engine is running, and try to grasp the cause of the malfunction. In case gears get stuck it is possible to clean and grease them. In the event that nothing happens, it is probably necessary to have the entire window regulator mechanism changed.
Suzuki Alto: Electric window blocked
A window of the Suzuki Alto is stuck. You try to make it go up by actuating the switch or by hand, nothing to do it is stuck. This malfunction could come from the motor of your window regulator, but generally it will be conceivable to have it assembled by hand. It is therefore much more plausible that the glass came out of its rail . When moving, when you mount the window, the latter abuts on one of the sides. In this case, do not force force. You have to open the door and check what is blocking inside. If the window guides ever prove to be damaged, you will probably have to change them.
Conclusion:
Basically, a window malfunction on your Suzuki Alto could result from an electrical malfunction, from your window regulator system, or from the rails that guide it. Do not hesitate to leave us a comment if your dysfunction is not cited in our text. Hope this article has helped you, good ride!