Behind these little buttons there are quite ingenious mechanisms. Ingenious, however quite often non-functional! Because this is a problem that we have all known, on a Suzuki Baleno or any car. But before changing the system, it is necessary to properly understand where the malfunction is coming from. Contact malfunction? Gears stuck? We will try to answer all of your questions below.window-lift-problem-Suzuki-Baleno

Suzuki Baleno: a window goes down but does not go up, or vice versa

Before changing the component, let's just see how this device works. When you press, or raise the switch on your window, there are two switches in practice . The electrical signal flows just when it is activated. It is therefore conceivable that the problem comes from an electrical fault. Remove the part with the help of a flat screwdriver, and inspect the cables at their beginning and at their end. If the malfunction should never come from a false contact, in this case it is the window lift motor of your Suzuki Baleno that does not work. It is also possible that gears are damaged. You can try to fix the problem, but in general it is necessary to replace the entire window regulator.

Suzuki Baleno: One window doesn't work at all

It is rare that the malfunction comes from the switch, because it would be necessary that the two connections or cables are defective. You can, however, control if you want to be sure. In this situation, the malfunction will certainly come from the window regulator mechanism of your Suzuki Baleno. It is possible that it comes from engine window lifter, or a faulty gear. Remove the door trim to examine inside. Operate the window to discern if the engine is running, and try to grasp the cause of the malfunction. If gears jam, you can dust and lubricate them. If nothing happens, you will probably have to replace the entire window mechanism.

Suzuki Baleno: Electric window blocked

A window of this Suzuki Baleno is stuck. You try to reassemble it by actuating the switch or by hand, nothing to do it remains blocked. This malfunction could come from the window regulator motor, but in general it will be conceivable to wind it by hand. It is therefore much more plausible that your window is out of its rail . By offsetting, as soon as you mount your window, the window hangs on one side. In these cases, there is no point in forcing. You will have to clear the door and check what is stuck inside. If the glass guides fail, you will probably have to change them.

Conclusion:

Simply put, a window malfunction on your Suzuki Baleno could result from a malfunction related to a false contact, of the window lifter mechanism, or of the rails that hold it. Do not hesitate to leave a comment if your problem is not mentioned above. Hoping that this file has helped, see you soon!