Beneath these switches are some pretty ingenious systems. Ingenious, but occasionally non-functional! Because it is a concern that we have all known, on a Toyota Endo or any car. However before replacing the mechanism, it is necessary to properly understand where the problem originated. A concern about false contact? Gears seized? We will try to answer your questions below.
Toyota Endo: a window goes down but does not go up, or vice versa
Before replacing the element, let's quickly see how it works. When you press, or raise the switch on your window, there are two switches in practice . The electrical connection goes right when you operate it. It is therefore likely that the concern comes from an electrical fault. Remove the part with the help of a flat screwdriver, then observe the electrical wiring when they leave when they arrive. If the problem never arises from a false contact, then the window lifter motor in your Toyota Endo is HS. It is also possible that gears are found to be in poor condition. Do not hesitate to try to troubleshoot the problem, but in general you will have to change the entire window regulator.
Toyota Endo: One window doesn't work at all
It is rather exceptional that the concern comes from the switch, because it would be necessary that the two switches or cables are defective at the same time. You can, however, watch if you want to be sure. In this situation, the concern will come from the window lifter mechanism of the Toyota Endo. It is possible that this one comes from engine window lift, or a defective gear. Remove the door covers to see inside. Activate the window to perceive if the engine is running, and try to apprehend the source of the problem. If gears get stuck you can dust and grease them. If nothing ever happens, it is probably necessary to change the entire window regulator mechanism.
Toyota Endo: Electric window blocked
A Toyota Endo window is blocked. You try to make it go up by pressing the switch or by hand, nothing to do it is blocked. This concern can come from the window regulator motor, but in general it will be conceivable to have it assembled by hand. It is therefore much more admissible that your window has come out of its rail . When moving, when you mount your window, the window hangs on one side. In this situation, there is no point in forcing anything. It is necessary to open the door and check what is blocking it. If the glass guides ever prove to be faulty, you will probably have to replace them.
Conclusion:
To put it simply, a glass problem on this Toyota Endo could come from an electric problem, the mechanism of the window regulator, or the rails which guide it. You can leave a comment if your concern is not cited in our text. Hope this guide has helped you, have a good ride!