Behind these buttons you can find quite ingenious systems. Ingenious, however often non-functional! Because it is a concern that we have all seen, for a Toyota Paseo or another automobile. Before changing the system, however, you just need to understand correctly where the malfunction is coming from. Contact malfunction? Gears seized? We will try to answer all of the questions in this article.
Toyota Paseo: a window goes down but does not go up, or vice versa
Before changing the component, let's quickly study how this device works. When you push in or raise the switch on your window, you can find two switches in practice . The electrical connection only goes through when activated. It is therefore likely that the concern comes from an electrical fault. Remove the block with a flat screwdriver, then examine the cables at their beginning and at their end. If the malfunction does not come from a bad electrical connection, then the window lift motor of your Toyota Paseo is HS. It is also possible that gears are found to be in poor condition. Do not hesitate to try to repair the problem, but generally it is necessary to replace the entire window regulator.
Toyota Paseo: One window doesn't work at all
It is rare that the malfunction comes from the button, because it would be necessary that the two connections or cables are defective at the same time. You will however be able to control if you wish to be convinced of this. In this case, the malfunction could come from the window lift mechanism of the Toyota Paseo. It is possible that it comes from engine window lift, or a defective gear. Remove the door trim to look inside. Activate the window to see if the engine is running, and find out the source of the malfunction. In case gears block, do not hesitate to clean and lubricate them. In the event that nothing happens, you will certainly have to replace the entire window regulator mechanism.
Toyota Paseo: Electric window blocked
A window in this Toyota Paseo is blocked. You try to reassemble it by actuating the switch or manually, nothing happens it remains stuck. This malfunction can come from the window regulator motor, but generally it is conceivable to wind it manually. It is therefore much more likely that the window has come out of its rail . By off-center, when you mount the window, it locks on one side. In this situation, do not force force. We will have to clear the door and go see what gets stuck in it. If the window guides prove to be damaged, they will certainly have to be changed.
Conclusion:
Simply put, a window malfunction on a Toyota Paseo could come from an electrical malfunction, from the window regulator system, or from the rails that hold it. Do not hesitate to post a comment if your concern does not appear in our text. Hoping that this text has served you something, good ride!