Behind these switches you can find rather ingenious mechanisms. Ingenious, however often faulty! Because this remains a concern that we have all known, for a Toyota Rav 4 (2nd Generation) or another car. Before replacing your device, however, you will need to know where the problem is coming from. A concern for contact? Gears stuck? We will try to answer all of your questions in this article.window-lift-problem-Toyota-Rav-4- (2th-Generation)

Toyota Rav 4 (2th Generation): a window goes down but does not go up, or vice versa

Before replacing the element, let's just see how this device works. When you push or lift the button on your window, there are two switches in the facts . The electrical connection only flows when you operate it. It is therefore likely that the concern arose from a false contact. Remove the block with a flat screwdriver, and examine the cables at their beginning and at their end. If the concern never comes from a false contact, in this case it is the window regulator motor of your Toyota Rav 4 (2nd Generation) which does not work. It is also possible that gears are found to be in poor condition. Do not hesitate to try to correct the problem, but generally it will be necessary to change the entire window regulator.

Toyota Rav 4 (2th Generation): One window does not work at all

It is rare that the problem comes from the switch, because it would be necessary that the two switches or cables are defective at the same time. You can still control if you want to be convinced. In this situation, the concern will certainly come from the window regulator mechanics of the Toyota Rav 4 (2nd Generation). It is possible that the latter comes from engine window lifter, or a faulty gear. Remove the door covers to check inside. Open the window to see if the engine is running, and try to grasp the causes of the problem. If any gears jam, you can clean and lubricate them. If nothing ever happens, it will certainly be necessary to change the mechanism of the window regulator in its entirety.

Toyota Rav 4 (2th Generation): Electric window blocked

A window of the Toyota Rav 4 (2nd Generation) is blocked. You try to reassemble it by pressing the button or by hand, nothing to do it remains stuck. This problem may arise from the window regulator motor, but generally it will be possible to reassemble it by hand. It is therefore much more plausible that the glass came out of its rail . When off-center, when you mount the window, it comes up against the rail. In this situation, there is no point in forcing anything. You have to open the door and look at what gets stuck inside. If the glass guides prove to be faulty, they will certainly have to be replaced.

Conclusion:

To put it simply, a glass problem on this Toyota Rav 4 (2nd Generation) could result from a problem related to a false contact, of the mechanism of the window regulator, or of the rails which maintain it. You can post a comment if your concern does not appear above. Hoping that this text has served you something, good ride!