
How a heater works on a Hyundai Kona
When it is cold it is our best ally on the way when we go to work. And when the latter no longer works, we quickly miss it. So to know where the malfunction came from, it is essential to understand how it works on this Hyundai Kona, at least in a simplified way. The heating uses the heat from the engine block to increase the heat from the personalised tour, and in most cases of the cooling mechanism. Therefore this system has several functions. Also, the fan mechanism, so that the hot air comes to us also presents a duplication. It's the ventilateur which sends hot air as soon as the car is driving slowly or not, and it is the speed of your automobile which will send hot air when you are driving at high speed. Well designed, right?
Recurring heating problems on a Hyundai Kona
Broken thermostat
The concept is simple, in the case where the thermostat which regulates the heat does not really measure the temperature of the water circuit, the whole of the latter is affected. Even if the thermostat of this Hyundai Kona still does not activate well, the heating will operate normally. Because the natural heat of the engine block will increase progressively, and the water circuit at the same time, whether the thermostat works or not. The only concern is that you will hardly be able to modify the heat emitted.
Air shutters blocked on the Hyundai Kona
It is a dysfunction that happens quite frequently. These shutters, which allow you to direct the air or adjust the intensity, sometimes get blocked over time. To remedy this it is simple, remove the cover and look inside how it was done. Activate the mechanisms to see where it is blocking. Put a little WD 40 to lubricate and voila.
Faulty fan on the Hyundai Kona
As you might expect, the fan is useful only at low speed and when stopped. If it happens that this heating does not emit any heat at reduced speed and that nevertheless you perceive its noise all the same, it means that the fan is probably out of order. A priori, with more speed the heating of this Hyundai Kona must work. If it happens that the fan really does not activate it will have to be replaced.
Blocked hoses
The signs turn out to be rather simple. When your heating blows but does not generate hot air or very slightly, the malfunction certainly comes from the hoses. These get dirty over time and do not allow hot water to heat your Hyundai Kona. In this case, wash the hoses or replace them with new ones.
Air pocket in the circuit of the Hyundai Kona
The symptom happens to be the same as that of the hoses. If it happens that small pockets of air are introduced inside the circuit, the hot water will also have trouble reaching the radiator of the heating of the Hyundai Kona. In this specific case, you just need to purge the water circuit.
Conclusion
You now know where the dysfunction will come from. That said it is possible that the problem comes from elsewhere, such as the air duct of this clogged Hyundai Kona, or even a defective tap, but it remains hours rarer. You can write a comment if you find this post useful. Good walk !