
How a heater works on a Ford Jeep
Winter is a definite asset on the road when you go to work. When it does not activate well we notice it quickly. So to find out what the problem comes from, it is essential to understand how it works on this Jeep Ford, at least in a simplified way. The heating uses the engine temperature to warm the personalised tour, then generally the cooling mechanism. Therefore it is a two in one. Also, the emission mechanism, so that the air reaches us presents a double system. There is a ventilateur which sends the air as soon as the vehicle is running at low speed or not at all, then it is the speed of the car which will send the air as soon as you drive faster. Pretty well thought out right?
Recurring heating problems on a Jeep Ford
Broken thermostat
The concept is easy, in the case where the thermostat which regulates the temperature does not really capture the degree of heat of the cooling circuit, the whole of the latter is impacted. Even if the thermostat of this Jeep Ford still does not activate well, the heating will work normally. Because the natural temperature of the engine will increase progressively, and the cooling circuit too, even without a thermostat. The only concern is that you can't really adjust the temperature.
Air shutters blocked on the Jeep Ford
It is a concern that occurs quite frequently. These shutters, which allow you to direct the air or adjust the intensity, sometimes get blocked over time. To remedy this it is simple, remove the cover and look inside how it was done. Activate the mechanisms to see where it is blocking. Put a little WD 40 to lubricate and voila.
Faulty fan on the Jeep Ford
As you will have understood, the fan is useful only at reduced speed and the engine off. If the heating does not emit air at reduced speed and yet you nevertheless discern a sound, it is that this fan turns out to be definitely defective. In general, thanks to a fast pace the heating of this Jeep Ford will be able to work. If ever the fan really does not activate it should be changed.
Blocked hoses
Its signs are rather simple. When your heating works and does not generate very little hot air, the problem is probably caused by the hoses. They clog up over time and no longer allow hot water to reach the heating of this Jeep Ford. In this situation, unclog the hoses or replace them with new ones.
Air pocket in the Jeep Ford circuit
The symptom happens to be identical to those of the hoses. If ever small pockets of air are inserted inside the circuit, the water has the same problems to access the radiator of the heating of your Jeep Ford. In this situation, it will suffice to purge the water circuit.
Conclusion
You now know where your concern may come from. That said it happens that the problem comes from another place, such as the air duct of this blocked Jeep Ford, or a defective valve, but it is still less common. Leave us a comment in case this article was useful to you. Good walk !