
How a heater works on a Kia Pride Kombi
In the middle of winter, heating is a definite asset on the journey when you go to work. And when the latter does not work we miss him quickly. So before understanding what the problem comes from, it is necessary to know how it works on this Kia Pride Kombi, at least its principle. The heating uses engine heat to heat the personalised tour, then in most cases the cooling system. Therefore this system has several functions. Also, the emission system, so that the heat reaches us has a double system. There is a ventilateur which emits heat as soon as the vehicle is traveling slowly or not at all, then it is the speed of the vehicle which will send heat when you are traveling faster. Well designed, right?
Recurring heating problems on a Kia Pride Kombi
Broken thermostat
The concept is simple, in the case where the thermostat which regulates the temperature does not really measure the degree of heat of the water in the circuit, the whole of the latter is affected. Even if the thermostat of this Kia Pride Kombi does not work well, the heating will work normally. Because the natural heat of the engine will gradually increase, then the cooling system in the same way, whether the thermostat works or not. The only concern is that you will have trouble adjusting the temperature.
Air shutters blocked on the Kia Pride Kombi
This is a problem that happens quite often. These shutters, which allow you to direct the air or adjust the intensity, sometimes get blocked over time. To remedy this it is simple, remove the cover and look inside how it was done. Activate the mechanisms to see where it is blocking. Put a little WD 40 to lubricate and voila.
Faulty fan on the Kia Pride Kombi
You have now entered, the fan is effective only at reduced speed and stopped. If this heater does not generate heat at reduced speed at all, but you can still hear a sound, then the fan is most likely defective. Ordinarily, with a high speed the heating of this Kia Pride Kombi will be able to work. If the fan does not work at all it is better to replace it.
Blocked hoses
The signs will be relatively simple. When your heating blows but does not heat or very little, the problem certainly comes from the hoses. They become clogged over time and do not allow hot water to heat the Kia Pride Kombi. In this situation, unclog the hoses or put new ones.
Air pocket in the Kia Pride Kombi circuit
The symptom is sometimes similar to those of the hoses. If small air pockets are inserted in the heart of the circuit, the hot water will also have problems reaching the radiator of the Kia Pride Kombi's heating. In this situation, it will suffice to purge the circuit.
Conclusion
You now understand what could cause this problem. However it happens that the reason comes from elsewhere, such as the air duct of this clogged Kia Pride Kombi, or a faulty tap, but it is still less frequent. Leave us a comment in case this article served you. See you soon !