heating-problem-Kia-Provo

How a heater works on a Kia Provo

In the middle of winter it is our best ally on the trip when we go to work. And when it no longer turns you can easily see it. So before understanding where the malfunction comes from, you will have to assimilate how it works on the famous Kia Provo, at least its principle. The heating uses engine heat to warm the personalised tour, then very often from the cooling device. Consequently, this duplicates. In a similar way, the fan device, so that the heat comes to us also has a dual purpose. There is a ventilateur which emits heat as soon as the vehicle is running at low speed or or not, then it is the speed of the vehicle which will send the heat when you drive at high speed. It's pretty clever isn't it?

Recurring heating problems on a Kia Provo

Broken thermostat

The idea is affordable, assuming that the thermostat that regulates the temperature does not really capture the temperature of the cooling circuit, the whole of the latter is affected. Even if the thermostat of the famous Kia Provo still does not work properly, the heating will still work. Simply because the heat produced by the engine will gradually increase, so the water circuit at the same time, whether the thermostat works or not. Our only concern is that you will hardly be able to control the heat emitted.

Air shutters blocked on the Kia Provo

It is a dysfunction that happens quite often. These shutters, which allow you to direct the air or adjust the intensity, sometimes get blocked over time. To remedy this it is simple, remove the cover and look inside how it was done. Activate the mechanisms to see where it is blocking. Put a little WD 40 to lubricate and voila.

Faulty fan on the Kia Provo

As you can imagine, the fan is effective only at reduced speed or when stopped. If the heater never produces more heat at reduced speed but you still hear noise, this means that this fan turns out to be probably defective. A priori, with a higher speed the heating of the famous Kia Provo must work. If the fan does not work at all it is better to replace it.

Blocked hoses

The symptoms are fairly obvious. In the event that your heating blows but does not generate very little hot air, the malfunction is certainly due to the hoses. They get blocked the more time passes and do not allow hot water to access your heating of the famous Kia Provo. Therefore, unclog the hoses or put new ones.

Air pocket in the Kia Provo circuit

The syndrome is sometimes identical to that of the hoses. If ever small pockets of air are introduced inside the circuit, water also has trouble reaching the radiator of the Kia Provo heater. Therefore, it is necessary to purge the water circuit.

Conclusion

You now understand where this dysfunction may come from. However it may be that the problem comes from another place, such as the air duct of the famous Kia Provo cluttered, or a broken tap, however it is still less frequent. Do not hesitate to leave a comment if this post has helped you. Good walk !