heating-problem-Kiaage-3

How a heater works on a Kiaage 3

When it is cold it is essential on the way to work. When it is no longer activated, it is easy to regret. So before understanding what the problem comes from, it is essential to understand how it works on the famous Kiaage 3, at least the basics. the heating uses engine heat to raise the temperature of the personalised tour, and very often the cooling device. Therefore this system has several functions. In addition, the fan device, so that the heat reaches us also holds a duplication. There is a ventilateur which emits heat when the vehicle is moving slowly or at walking pace, and it is the speed of the vehicle that allows the heat to be sent when you are driving faster. Pretty smart isn't it?

Recurring heating problems on a Kiaage 3

Broken thermostat

The concept is simple, in the event that the thermostat which allows you to adjust the temperature does not really understand the degree of heat of the water circuit, the entire latter is affected. Even though the thermostat of the famous Kiaage 3 still does not work correctly, the heating will still work. Quite simply because the heat produced by the engine will increase gradually, so the water circuit at the same time, even without a thermostat. The only inconvenience is that you will have difficulty regulating the air temperature.

Air shutters blocked on the Kiaage 3

This is a problem that occurs quite frequently. These shutters, which allow you to direct the air or adjust the intensity, sometimes get blocked over time. To remedy this it is simple, remove the cover and look inside how it was done. Activate the mechanisms to see where it is blocking. Put a little WD 40 to lubricate and voila.

Faulty fan on the Kiaage 3

As you can imagine, the fan is only used at low speed or in neutral. If it happens that the heater does not emit heat at all at low speed, but you still hear noise, then the fan may have turned out to be screwed up. A priori, with more speed the heating of the famous Kiaage 3 should work. If ever the fan really does not work, it is better to replace it.

Blocked hoses

Its clues will be relatively simple. If your heater is blowing and creating little or no heat, the problem is probably with the hoses. They become clogged over time and do not allow hot water to access the heating of the famous Kiaage 3. In this case, clean the hoses or replace them with new ones.

Air pocket in the Kiaage 3 circuit

The symptom is sometimes identical to those of the hoses. If it happens that air streams are inserted in the heart of the circuit, the high temperature water will also have problems accessing the heater radiator of the Kiaage 3. In this case, it suffices to bleed the circuit.

Conclusion

You now understand where this problem could arise. On the other hand it may be that the problem comes from another place, such as the air duct of the famous Kiaage 3 blocked, or even a defective valve, but it is unfortunately rather rare. Leave us a comment if this tutorial has helped you. Goodbye !