
How a heater works on a Mazda Sassou
In the middle of winter it is essential on the road when you go to work. When it does not activate well we miss it easily. So before knowing where the problem came from, it is necessary to know how it works on this Mazda Sassou, at least the basics. The heating use the engine temperature to be able to raise the temperature of the personalised tour, and in most cases the cooling system. In fact it is a two in one. Also, the fan system, so that air comes into the cabin has a double system. It's the ventilateur which emits air as soon as the car drives slowly or not at all, and it is the speed of the vehicle that will send the air when you drive faster. Well designed, right?
Recurring heating problems on a Mazda Sassou
Broken thermostat
The concept is easy, in the case where the thermostat which regulates the temperature does not really understand the temperature of the cooling circuit, the latter is affected. Even if the Mazda Sassou's thermostat no longer works correctly, the heating will still work. Because the natural temperature of the engine will increase gradually, so will the cooling system in the same way, even without a thermostat. The only concern is that you will hardly be able to control the air temperature.
Air shutters blocked on Mazda Sassou
This is a problem that occurs fairly regularly. These shutters, which allow you to direct the air or adjust the intensity, sometimes get blocked over time. To remedy this it is simple, remove the cover and look inside how it was done. Activate the mechanisms to see where it is blocking. Put a little WD 40 to lubricate and voila.
Faulty fan on Mazda Sassou
As you might expect, the fan is useful only at low speed or when stopped. If this heater never sends more heat at low speed and you still hear a sound, it means that the fan is definitely screwed up. If all goes well, thanks to a higher speed the heating of this Mazda Sassou must turn. If it happens that the fan does not turn it will have to be replaced by a new one.
Blocked hoses
The signs will be rather simple. If your heating blows but does not generate little or no hot air, the problem probably comes from the hoses. They become blocked over time and no longer allow hot water to access your Mazda Sassou heating. In this case, wash the hoses or put new ones.
Air pocket in the Mazda Sassou circuit
The symptom is sometimes similar to those of the hoses. If ever air bubbles are stored inside the circuit, hot water will also have problems reaching the radiator of the Mazda Sassou heating. In this case, it will suffice to purge the circuit.
Conclusion
You now know where the problem may arise. That said it may be that the reason comes from elsewhere, for example the air duct of this cluttered Mazda Sassou, even a defective valve, however it is still more rare. Do not hesitate to leave a comment if this tutorial served you well. Enjoy the road!