The blinkers turn out to be extremely important . As soon as they fall in rade it can be unpleasant. In addition to being dangerous, your indicators are above all required , mainly for obvious security reasons. Little reminder of the law, not putting its turn signals is liable to a fine thirty-five ?? and of 3 point on your driver's license. So when you know of a flashing problem on the Jeep Cj7, it is essential to pay attention to it as soon as possible. In this post we will see what are the very frequent flashing problems and what are the causes.problem-flashing-Jeep-Cj7

A single flashing light on your Jeep Cj7 does not work

The truly admissible source remains that its ampoule is HS. We advise you to remove the indicator block from inside the car and then check. So, if you want to change the bulb, it is necessary to control the size of its base but also its power expressed in Watt. If it is not the bulb that is HS, this is due to a concern with the electrical connection. Follow the turn signal power lead in the Jeep Cj7, and check that the connections are good. It happens that the famous connection is oxidized, in this situation it is necessary to deoxidize it.

No indicator on your Jeep Cj7 is working

When not one of your indicators is working, the problem probably comes from the central power of the Jeep Cj7. Just before having it changed, it is necessary to check two points first. Sometimes it’s just a concern for fuse . If this is the case, you just have to replace it with a new one. It is also possible that it comes from a problem of connection to the central power supply. Check this power supply and its wiring. If the fuse is operational and the power supply is correctly connected, you will probably have to change this power supply.

Jeep Cj7: The indicators work however are weak

When the indicators of the Jeep Cj7 work however are weak, it is in general in connection with a concern power . It happens that the latter is in bad condition, you will have to change it. In the case where only one indicator is abnormally weak, the problem comes from a connection problem. In the case where you bought a used vehicle, it is also plausible that the last purchaser changed the bulb without respecting the power in Watts.

Jeep Cj7: The turn signal works but abnormally

If your turn signal is flashing more or less quickly than normal, this is probably due to a problem mass gain . Basically, there may be a false contact. Therefore check the electrical connections at the level of this indicator so as to check if one of them is defeated or is touching a metal part. Correcting a blinker problem is not the most expensive thing. However, mechanics will then replace the central power supply while this may result from a small concern about false contact. Write a comment if this post was helpful. See you soon!