Your blinkers turn out to be very important . When they fall in breakdown it's probably annoying. In addition to being problematic, these indicators are also required , for understandable security reasons. Legally, forgetting your flashing light will cause fine 35 euros and 3 point on the driving license. In fact when there is a flashing malfunction on your Suzuki Alto, it is important to remedy it as soon as possible. Through this article we will see what will be the most regular flashing concerns and what will be the reasons.
A single indicator on your Suzuki Alto does not work
The most plausible source is that his ampoule is HS. We advise you to remove the indicator cover from inside the car and look. To replace the lamp, it will be necessary to look at the size of the base but also the power expressed in W. If ever the malfunction does not come from the bulb, it is in this case linked to a malfunction of contact. Reassemble the indicator wire in your Suzuki Alto, and check that the connections are good. The electrical connection may be oxidized, in which case it will have to be deoxidized.
No indicator on your Suzuki Alto is working
If not one of your indicators works, the malfunction probably comes from the central supply of your Suzuki Alto. Right before you get it replaced, there are a few things you need to look at first. It may just be a malfunction of fuse . If this is the case, it will suffice to change it. It is just as possible that it is a malfunction of connection to the power supply. Check the power supply but also its wiring. If the fuse is in good working order and the power supply is properly supplied, it will probably be necessary to replace the power supply.
Suzuki Alto: The indicators work but are weak
When the indicators of your Suzuki Alto work but remain weak, it is usually due to a malfunction power . It may be deficient, it will have to be replaced. In the event that only one indicator is weak, the malfunction comes from a bad connection. In case you bought a used car, it is quite possible that the former purchaser changed the lamp while failing to respect the power in Watts.
Suzuki Alto: The turn signal works but abnormally
If this indicator flashes at a different speed from normal, it is probably due to a malfunction of mass gain . To put it more simply, it is a false contact. Then examine the connections on this indicator to check if one of them is detached or is in contact with a metal part. Repairing a flasher malfunction is not the most expensive thing. On the other hand, some professionals will have you replace the central power supply when it could come from a simple malfunction of false contact. Write a comment in case this article was useful. Good walk!