The blinkers turn out to be genuinely important . When they are in rade it's frankly annoying. In addition to being problematic, these indicators are above all required , mainly for understandable safety reasons. Legally, failing to put its turn signal will cause a traffic ticket 35 euros as well as three points on the permit. So if you know of a flashing issue on the Suzuki Celerio, it is essential to deal with it quickly enough. Via this post we will find out what will be the rather regular flashing malfunctions and what are their origins.flashing-problem-Suzuki-Celerio

A single indicator on your Suzuki Celerio does not work

The really plausible origin is that your ampoule is toasted. We advise you to remove the indicator block from inside your car and to check. To change the lamp, it will be necessary to check the size of the base but also the power expressed in W. In the case where the problem does not come from the bulb, it is then due to a problem of contact. Browse the turn signal wire on the Suzuki Celerio, and verify that the connections are good. It is possible that the electrical connection is oxidized, if this is the case it will have to be deoxidized.

No indicator on your Suzuki Celerio is working

When none of the turn signals is on, the problem probably comes from the general power supply of the Suzuki Celerio. Before having it changed, it will be necessary to check certain points first. It may just be a concern for fuse . In this situation just change it. It is just as possible that it comes from a concern of wiring to the power supply. Examine the general power supply and its connections. If this fuse is intact and the power supply is properly wired, this supply must certainly be changed.

Suzuki Celerio: The indicators work nonetheless are weak

When the indicators of the Suzuki Celerio work nevertheless remain weak, this often remains due to a concern power . It is possible that it is defective, you will have to change it in this situation. If only one indicator is weak, this concern comes from a connection problem. In case you bought a used car, it is still possible that the previous owner changed the lamp while forgetting to respect the voltage.

Suzuki Celerio: The flashing light works but abnormally

When your turn signal is activated more or less quickly than usual, it may be due to a concern of mass gain . To put it more simply, it's bad contact. So inspect the connections at your turn signal to check if one of them is loose or touches a metal part. Repairing a blinker problem is not the most expensive. On the other hand, mechanics will make you replace the general food while that could come from a small concern of bad contact. Leave us a comment if this post was useful to you. Good road!