Your blinkers turn out to be really important . When they are in rade it can be annoying. In addition to being dangerous, your indicators are all the more required , for obvious security reasons. Small reminder of the law, not activating your turn signals is punishable by fine of 35 ?? and of 3 point on your license. So if you have a flashing problem on your Toyota Corolla 5, it is necessary to take care of it fairly quickly. In this text we will find out what will be the most frequent blinker problems and what are the reasons.
A single indicator on your Toyota Corolla 5 does not work
The most plausible source is that ampoule is toasted. We advise you to remove the indicator cover from inside the car and check. To change the lamp, you will have to check the size of the base as well as its power expressed in W. If the lamp is not out of order, it is in this case related to a contact problem. Reassemble the turn signal power wire in your Toyota Corolla 5, and see if the connections are good. It is possible that this bond is oxidized, if it is the case it will have to be cleaned.
No indicator on your Toyota Corolla 5 is working
If not a single one of the indicators is on, the problem probably stems from the general power supply of your Toyota Corolla 5. Before having it changed, it is necessary to check a few things first. It is possible that it is only a problem of fuse . In this case, it will suffice to replace it with a new one. It is also possible that it is a problem of connection to the general power supply. Check this power supply as well as its connections. If the fuse is operational and the power supply is indeed supplied, it may be necessary to change this supply.
Toyota Corolla 5: The indicators work nonetheless are weak
When the indicators of your Toyota Corolla 5 still work remain weak, it is usually related to a problem power . It is possible that it is in bad condition, in this case you will need to change it. If a single flashing light is abnormally weak, the problem stems from a fault in the electrical connection. If you have invested in a used car, it is quite conceivable that the last purchaser replaced the lamp without respecting the voltage.
Toyota Corolla 5: The turn signal works but abnormally
If your turn signal is activated at a different speed than normal, this is probably due to a problem with the mass gain . To put it more simply, there may be a false contact. Therefore, check the electrical connections of this flashing light so as to verify whether one of them is disconnected or is in contact with a metal part. Correcting a blinker problem isn't the most expensive thing. However, professionals will then replace the general power supply while it could come from a small problem of false contact. Post a comment if this text helped you. Be careful!