If there really is breakdown it is unpleasant. Even if it is not necessarily serious, it is necessary to remove this problem quickly for obvious safety reasons. Brief advice, if you have a common dial problem, it is advisable to use a phone app such as Waze . You will know your speed as close as possible using a device geolocation . What is more, the positions of fixed and mobile speed cameras are indicated by most other drivers. In this guide, we will see what are the most common speedometer problems on your Hyundai I-mode, but also their causes.meter-problem-Hyundai-I-mode

The jumping needle of your Hyundai I-mode

This is a particularly annoying problem. If this needle jumps, it is binding to know its effective speed . In addition, your gaze is spontaneously drawn to this problem, which is quite problematic. There are a few common reasons for this problem. It happens that the connection between the speed sensor and your dial of this Hyundai I-mode is deficient. Another reason, this speed sensor is faulty, it will probably have to be replaced. More rarely, the problem comes from the pivot of the needle.

The Hyundai I-mode counter remains at zero

Here is the problème the most tiring. The display of the dial which remains at zero is frequently due to a sensor malfunction. The sensor is clearly not necessarily defective. Sometimes it will be enough to apply a specific product for connections to clean it. The connection problem therefore remains very frequent in a Hyundai I-mode. On the other hand, it is sometimes also possible that the pivot which will allow the needle to rotate is broken. In this case, it is not easy to find only this component individually. If your problem is still not repaired, you should probably repair the sensors of this Hyundai I-mode. We still advise you to go to a mechanic to make a real observation.

Approximate speed of the counter

Know that basic, a speedometer is an approximate bit. If you are driving, the speed displayed is approximately 5% above the actual pace of this Hyundai I-mode. It is a safety choice that manufacturers have taken to avoid speeding, and problems with drivers. If you want to measure your speed, we advise you to drive on a fast lane accompanied by an application like waze. For stable gaits, the app is more efficient. Assumed that the displayed speed is really discordant, so there is certainly a malfunction coming from the sensors. We therefore advise you to have them checked. As we have seen, the problem generally comes from the sensors of this Hyundai I-mode. Having a sensor replaced will often come back cheaper than replacing the dial. So, examine the cause of this problem before going to your garage. Hope this guide has been useful for you, have a good ride!