Power steering malfunctions are relatively common and easy to spot. If your maneuvers will be complicated to accomplish or that management produces noise when you turn, it's probably a power steering malfunction. Before transporting the Toyota Rav 4 (2nd Generation) to a professional, it is essential to understand the source of the malfunction. In this post, we will discover how your power steering works, what the causes as well as the symptoms and how to fix it.
How does power steering work on a Toyota Rav 4 (2rd Generation)
On all Toyota Rav 4 (2nd Generation) there is a steering rack. This is what connects the steering and the wheels. This power steering consists of inserting a hydraulic device between the valance and this rack and pinion. Some vehicle lines will now have electric mechanisms. This type of hydraulic mechanism will improve the orbit of this rack with respect to the flywheel, and is only activated at low speed. This is why on expressways this steering wheel remains less flexible than in slots in urban areas.
The causes and symptoms of power steering on a Toyota Rav 4 (2nd Generation)
Obviously, the dominant signal will be a rigid direction. It is possible that the steering of the Toyota Rav 4 (2nd Generation) can be difficult to steer only in one orientation. You may also hear a hum or noise when you steer the steering. Now, we will take a closer look at these situations and how to correct them.
A hissing sound is heard
If you can hear like a whistle when you park the Toyota Rav 4 (2nd Generation), the malfunction is mostly caused by the fluid levels. In this situation, it remains essential to top up the level and thus the malfunction must be removed.
Steering is harder on one side than the other
It could also be linked to a malfunction in the quantity of fluids. However, your malfunction may at the same time result from your Toyota Rav 4 (2nd Generation) assist cylinder. In this situation, you will most likely need to replace it.
Both sides are difficult to maneuver
In this situation the problem is probably due to a pressure failure. hydraulic. If in doubt, you can check the fluid levels. Assuming these levels are ok, we recommend that you go to a mechanic to have your pressure checked. If you've found a leak, don't delay!
Conclusion
This kind of power steering malfunction may not complicate the way you drive too much. However, this problem could suddenly be damaged and cause even more serious malfunctions. Broken steering on a Toyota Rav 4 (2nd Generation) can be extremely expensive! It is recommended to perform the oil change almost every 5 years. It will cost 50 euros or more to do this drain. Leave us a comment if this article has helped you. Enjoy the road!