A malfunction of central locking is quite annoying. From time to time it can even be dangerous, simply because we can get stuck in it. Depending on the range of cars, the centralized locks engage automatically when closing the doors, for others it must be operated manually. So we will see in this article what will be the most common problems and what are the solutions to solve them.
The central locking of your Hyundai Kona no longer works
Certain clues may assist you in finding the breakdown. In particular depending on the number of doors affected by your problem. Let's take a closer look.
Hyundai Kona: central locking no longer works on one of the doors
First try to lock your door manually. When this presents no problem, it means that the device is operational. So your problem came from somewhere else upstream. In principle, this is a problem originating from a break in the electrical circuit. In order to control it it's extremely easy! You are going to have to open the door of this Hyundai Kona by removing the covers. Follow the electrical wires from the locking device. Thus check the electrical connections but also the condition of the cable. You will therefore have to repair the problem in question. When on the other hand the closing is hard manually and with the buttons, it means that it is the device which has a problem. Do not panic, just lubricate it or change it if it is completely defective.
Hyundai Kona: central locking does not work at all
This is a problem which can become extremely annoying. The central locking of the Hyundai Kona does not work any more. The origin of the problem is not easy to locate. We will see the most common problems.
Replace fuses on your Hyundai Kona
The problem may be caused by a fuse wire rack. It is very convenient to recognize visually. In this situation you totally imagine the procedure to follow, you just have to replace it. This is a fairly rare problem however it can happen.
General feeding problem
When your automobile has a general power problem, it is uncommon for just the shutdown to stop working. So don't worry, this is probably not your problem, you won't be on this article if it was. However, it is sometimes possible that there is a contact problem from the power supply to the central locking device. You will need to clean the connection or replace the wiring. It is simple to repair , is it still necessary to find the short circuit.
Hyundai Kona: Change your key battery
Your key may just not work! We can sometimes forget this phenomenon, however it is your key that controls the locking system. In this situation it is all the more commode , just open your key a little, using a flat screwdriver for example, and replace the battery in the key. You can write a comment if your problem is not present inside this text, to help our readers! Good walk.