A concern with central locking is relatively annoying. Regularly it can even be dangerous, because you can get stuck in it. Depending on the styles of cars, the centralized closings are activated automatically when you close the doors, for others you will have to do it alone. So here we are going to find out what are the most common problems and what to do to fix them.
The central locking of your Hyundai Pony no longer works
Certain symptoms may help you find the fault. Among other things depending on the number of doors affected by your problem. Let's take a closer look.
Hyundai Pony: central locking no longer works on one of the doors
First try to lock your door manually. When this presents no complications, it means that your mechanism is in good condition. So your problem comes from somewhere else upstream. Usually this is a problem originating from a short circuit. In order to control it it's very easy! You will need to open the door of this Hyundai Pony by removing the trim. Follow the electrical wires that leave the closing mechanism. So inspect the wiring but also the good condition of the cable. You will therefore have to rectify the problem that you have found. If, despite everything, the closure is hard manually and with the buttons, this means that the mechanism has a problem. Don't worry, just oil it or replace it if it is completely defective.
Hyundai Pony: central locking no longer works at all
This is a problem that can become very annoying. Central locking of your Hyundai Pony does not work anymore. The cause of the problem is not obvious to locate. So we will see the most common problems.
Changing fuses on your Hyundai Pony
The problem can arise from a fuse wire rack. It remains rather simple to recognize visually. In this situation you know completely what to do, just change it. This remains a relatively rare problem but it can happen.
General feeding problem
If your car ever has a general power problem, it is very rare that only the lock no longer works. So rest assured, this is probably not the problem and you would not be on this page right now. However, it sometimes happens that there is a problem of contact between the power supply and the central locking mechanism. You will need to clean the connection or replace the wiring. It stays simple to repair , the most complex is to find the false contact.
Hyundai Pony: Change your key battery
It is only possible that your key has run out of battery! We can sometimes forget this phenomenon, however it is your key that controls the locking system. In this situation it is all the more easy , just half open your key, using a flat screwdriver for example, and change the battery inside. We invite you to write a comment if your problem is not present in this text, to help other Hyundai Pony owners! Be careful.